From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= Date: Wed, 1 Dec 2010 00:58:32 +0100 Subject: [U-Boot] [PATCH 0/4] ARM relocation fixes Message-ID: <1291161516-21861-1-git-send-email-andreas.devel@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de As discussed in http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/89864/focus=89905 here are the changes for r8 usage in all arm relocate_code() implementations. Additionally there is a change to armv7 code which is persumably broken (at least when CONFIG_PRELADER is _not_ defined). Please comment on that patch, the rest should go in v2010.12. Andreas Bie?mann (4): arm: copy_loop(): use scratch register arm: relocate_code(): do not set register useless arm: fixloop(): do not use r8 for relocation armv7: fix relocation skip arch/arm/cpu/arm1136/start.S | 20 ++++++++++---------- arch/arm/cpu/arm1176/start.S | 20 ++++++++++---------- arch/arm/cpu/arm720t/start.S | 20 ++++++++++---------- arch/arm/cpu/arm920t/start.S | 20 ++++++++++---------- arch/arm/cpu/arm925t/start.S | 20 ++++++++++---------- arch/arm/cpu/arm926ejs/start.S | 20 ++++++++++---------- arch/arm/cpu/arm946es/start.S | 20 ++++++++++---------- arch/arm/cpu/arm_intcm/start.S | 20 ++++++++++---------- arch/arm/cpu/armv7/start.S | 24 ++++++++++++------------ arch/arm/cpu/ixp/start.S | 20 ++++++++++---------- arch/arm/cpu/lh7a40x/start.S | 20 ++++++++++---------- arch/arm/cpu/pxa/start.S | 20 ++++++++++---------- arch/arm/cpu/s3c44b0/start.S | 20 ++++++++++---------- arch/arm/cpu/sa1100/start.S | 20 ++++++++++---------- 14 files changed, 142 insertions(+), 142 deletions(-) -- 1.7.3.2