From: Hema HK Subject: [PATCH 0/7] usb: otg: TWL6030: OMAP4430: musb & transceiver driver support for OMAP4 Date: Tue, 7 Dec 2010 19:09:31 -0500 Message-ID: <1291766971-9986-1-git-send-email-hemahk@ti.com> Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:56273 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754056Ab0LGNhq (ORCPT ); Tue, 7 Dec 2010 08:37:46 -0500 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org, linux-usb-owner@vger.kernel.org Cc: Hema HK , Felipe Balbi , Tony Lindgren , David Brownell , Samuel Ortiz This patch series has the support for TWL6030-usb transceiver driver and changes in the musb driver to make it functional with OMAP4430. OMAP4 musb support UTMI and ULPI transceiver interfaces. In UTMI mode, the transceiver functionality is split between the TWL6030 PMIC chip and OMAP4 embedded PHY. The TWL6030 transceiver driver code is under otg folder and internal UTMI PHY specific code changes are defined under mach-omap2 directory and functions are passed through platform_data structure. This patch series is based on V2.6.37-rc4 + [1]+[2]+[3]+[4]. [1] http://www.listware.net/201011/linux-usb/ 65625-patch-resend-v3-usb-musb-do-not-use-dma-for-control-transfers.html [2] http://www.spinics.net/lists/linux-usb/msg37105.html [3] http://permalink.gmane.org/gmane.linux.usb.general/37123 [4] Felipe's musb-reorg patch series. http://gitorious.org/usb/usb/commits/musb-hw Tested musb device and host mode functionality with OMAP4430SDP and OMAP3630 ZOOM3. Cc: Felipe Balbi Cc: Tony Lindgren Cc: David Brownell Cc: Samuel Ortiz --- Hema HK (7): mfd: TWL6030: USBOTG VBUS event generation on charger VBUS events. usb: otg: Adding twl6030-usb transceiver driver for OMAP4430 musb usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver. mfd: TWL6030: OMAP4: Registering the TWL6030-usb device usb: musb: TWL6030: Selecting TWL6030_USB transceiver for OMAP4 usb: musb: Adding musb support for OMAP4430 arm: OMAP4430: musb: Enable musb device initialization for OMAP4430 arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-4430sdp.c | 15 +- arch/arm/mach-omap2/board-omap4panda.c | 9 +- arch/arm/mach-omap2/omap_phy_internal.c | 123 +++++++ arch/arm/plat-omap/include/plat/usb.h | 4 + drivers/mfd/twl-core.c | 44 +++- drivers/mfd/twl6030-irq.c | 9 +- drivers/usb/musb/Kconfig | 1 + drivers/usb/musb/musb_core.c | 5 + drivers/usb/musb/musb_core.h | 1 + drivers/usb/musb/musb_gadget.c | 1 + drivers/usb/musb/omap2430.c | 85 +++++- drivers/usb/otg/Kconfig | 11 + drivers/usb/otg/Makefile | 1 + drivers/usb/otg/twl6030-usb.c | 527 +++++++++++++++++++++++++++++++ include/linux/i2c/twl.h | 6 + 16 files changed, 824 insertions(+), 19 deletions(-)