Return-Path: Received: from mail-out.m-online.net (mail-out.m-online.net [212.18.0.9]) by ozlabs.org (Postfix) with ESMTP id BCFE2B71C1 for ; Sat, 11 Dec 2010 17:13:10 +1100 (EST) From: Heiko Schocher To: linuxppc-dev@lists.ozlabs.org Subject: [PATCH 2/2] powerpc, mpc5200: update mpc5200_defconfig to fit for charon board. Date: Sat, 11 Dec 2010 07:13:01 +0100 Message-Id: <1292047981-1435-2-git-send-email-hs@denx.de> In-Reply-To: <1292047981-1435-1-git-send-email-hs@denx.de> References: <1292047981-1435-1-git-send-email-hs@denx.de> Cc: Heiko Schocher List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , add to mpc5200_defconfig: CONFIG_SENSORS_LM80=m CONFIG_RTC_DRV_DS1374=m as this is used by the charon board. Signed-off-by: Heiko Schocher cc: Wolfram Sang cc: linuxppc-dev@lists.ozlabs.org --- - based against 2.6.37-rc4 arch/powerpc/configs/mpc5200_defconfig | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 6f75623..70e5d8e 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -78,6 +78,7 @@ CONFIG_SPI_GPIO=m CONFIG_SPI_MPC52xx=m CONFIG_SPI_MPC52xx_PSC=m CONFIG_SPI_SPIDEV=m +CONFIG_SENSORS_LM80=m CONFIG_WATCHDOG=y CONFIG_DRM=y CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -110,6 +111,7 @@ CONFIG_USB_STORAGE=y CONFIG_NEW_LEDS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -- 1.7.2.3