From: Mark Brown Subject: [PATCH] ASoC: Don't warn if the WM8962 SYSCLK FLL setting doesn't match reality Date: Mon, 25 Apr 2011 18:28:25 +0100 Message-ID: <1303752505-21675-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource2.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id 4029C24412 for ; Mon, 25 Apr 2011 19:28:16 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org When bringing up audio low power modes boards may configure SYSCLK before they actually start the FLL as we do much of the clocking setup prior to the power up sequence. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8962.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index d6b78b2..7d6ace3 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2991,7 +2991,6 @@ static int wm8962_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, case WM8962_SYSCLK_FLL: wm8962->sysclk = WM8962_SYSCLK_FLL; src = 1 << WM8962_SYSCLK_SRC_SHIFT; - WARN_ON(freq != wm8962->fll_fout); break; default: return -EINVAL; -- 1.7.4.1