Received: from smtprelay-h22.telenor.se ([195.54.99.197]) by linuxtogo.org with esmtp (Exim 4.72) (envelope-from ) id 1QLWiD-0002Bz-0R for openembedded-devel@lists.openembedded.org; Sun, 15 May 2011 10:30:05 +0200 Received: from ipb1.telenor.se (ipb1.telenor.se [195.54.127.164]) by smtprelay-h22.telenor.se (Postfix) with ESMTP id ACB9DEAC54 for ; Sun, 15 May 2011 09:59:23 +0200 (CEST) X-SENDER-IP: [83.227.57.42] X-LISTENER: [smtp.bredband.net] X-IronPort-Anti-Spam-Filtered: true X-IronPort-Anti-Spam-Result: Aj1YAI6Gz01T4zkqPGdsb2JhbACJH5x1CwEBAQE3MrxFAYwPhhkEkBGOdw X-IronPort-AV: E=Sophos;i="4.64,368,1301868000"; d="scan'208";a="189787484" Received: from c-2a39e353.011-39-73746f12.cust.bredbandsbolaget.se (HELO localhost) ([83.227.57.42]) by ipb1.telenor.se with ESMTP; 15 May 2011 09:59:23 +0200 From: ulf.samuelsson@atmel.com To: openembedded-devel@lists.openembedded.org Date: Sun, 15 May 2011 09:59:14 +0200 Message-Id: <1305446355-4779-2-git-send-email-ulf.samuelsson@atmel.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1305446355-4779-1-git-send-email-ulf.samuelsson@atmel.com> References: <1305446355-4779-1-git-send-email-ulf.samuelsson@atmel.com> Cc: Ulf Samuelsson Subject: [PATCH 2/3] Add at91 support for linux-2.6.38 X-BeenThere: openembedded-devel@lists.openembedded.org X-Mailman-Version: 2.1.11 Precedence: list Reply-To: openembedded-devel@lists.openembedded.org List-Id: Using the OpenEmbedded metadata to build Distributions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 15 May 2011 08:30:05 -0000 From: Ulf Samuelsson Signed-off-by: Ulf Samuelsson --- recipes/linux/linux_2.6.38.bb | 45 ++++++++++++++++++++++++++++++++++++++++- 1 files changed, 44 insertions(+), 1 deletions(-) diff --git a/recipes/linux/linux_2.6.38.bb b/recipes/linux/linux_2.6.38.bb index 186f987..8c551bd 100644 --- a/recipes/linux/linux_2.6.38.bb +++ b/recipes/linux/linux_2.6.38.bb @@ -1,6 +1,6 @@ require linux.inc -PR = "r3" +PR = "r4" # Mark archs/machines that this kernel supports DEFAULT_PREFERENCE = "-1" @@ -12,11 +12,54 @@ DEFAULT_PREFERENCE_poodle = "1" DEFAULT_PREFERENCE_spitz = "1" DEFAULT_PREFERENCE_tosa = "1" DEFAULT_PREFERENCE_ts72xx = "1" +DEFAULT_PREFERENCE_at572d940hfek = "4" +DEFAULT_PREFERENCE_at91cap9adk = "4" +DEFAULT_PREFERENCE_at91rm9200 = "4" +DEFAULT_PREFERENCE_at91rm9200dk = "4" +DEFAULT_PREFERENCE_at91rm9200ek = "4" +DEFAULT_PREFERENCE_at91sam9260ek = "4" +DEFAULT_PREFERENCE_at91sam9261ek = "4" +DEFAULT_PREFERENCE_at91sam9263ek = "4" +DEFAULT_PREFERENCE_at91sam9g10ek = "4" +DEFAULT_PREFERENCE_at91sam9g20ek = "4" +DEFAULT_PREFERENCE_at91sam9g20ek_2mmc = "4" +DEFAULT_PREFERENCE_at91sam9g45ekes = "4" +DEFAULT_PREFERENCE_at91sam9m10ekes = "4" +DEFAULT_PREFERENCE_at91sam9m10g45ek = "4" +DEFAULT_PREFERENCE_at91sam9rlek = "4" +DEFAULT_PREFERENCE_at91sam9xeek = "4" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \ ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.4.bz2;apply=yes;name=stablepatch \ file://defconfig " +SRC_URI_at91 = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \ + file://0001-Maxim-patch-updated-from-2.6.30-to-2.6.38.patch;apply=yes \ + file://0002-Add-MACB-TX-Buffer-in-SRAM-support.patch;apply=yes \ + file://0003-AT91-atmel-mci-Platform-configuration-to-the-the-atm.patch;apply=yes \ + file://0004-at91_mci-Do-a-reset-after-each-request.patch;apply=yes \ + file://0005-at91-at91sam9g20ek-modify-dual-slot-evaluation-kit.patch;apply=yes \ + file://0006-at91-add-gpio-buttons-to-at91sam9g20-ek-2mmc.patch;apply=yes \ + file://0007-Bug-workaround-for-channel-in-ac97.patch;apply=yes \ + file://0008-input-atmel_tsadcc-report-fake-pressure-measure.patch;apply=yes \ + file://0009-at91-No-more-SD-MMC-Write-Protect-pin-connected-on-a.patch;apply=yes \ + file://0010-net-macb-modify-SRAM-location-of-descriptor-buffers-.patch;apply=yes \ + file://0011-at91-add-pwm-support-in-Kconfig-for-at91sam9g45.patch;apply=yes \ + file://0012-at91-add-I2C-definitions-for-at91sam9g20ek-boards.patch;apply=yes \ + file://0013-at91-add-at91sam9g10ek-defconfig-file.patch;apply=yes \ + file://0014-t91-add-at91sam9m10ekes-support.patch;apply=yes \ + file://0015-at91-at91sam9m10-add-dma-touchscreen-mmc-usb-host-an.patch;apply=yes \ + file://0016-at91-at91sam9m10-add-video-decoder-clock.patch;apply=yes \ + file://0017-at91sam9m10-add-on2-8170-gpl-modules.patch;apply=yes \ + file://0018-sound-atmel-ac97-add-warm-reset-if-no-reset-pin.patch;apply=yes \ + file://0019-at91-introduce-at91sam9m10g45ek-board.patch;apply=yes \ + file://0020-input-atmel_tsadcc-introduce-changes-needed-for-at91.patch;apply=yes \ + file://0021-at91-Clean-up-choiuce-of-sam9m10-g45-boards.patch;apply=yes \ + file://0022-at91-Add-support-for-configurable-NAND-flash-partiti.patch;apply=yes \ + file://0023-at91-Update-defconfig-s-for-atmel-at91-boards.patch;apply=yes \ + file://0024-at91-Cleanup-of-defconfig-s.patch;apply=yes \ + file://defconfig " + SRC_URI_append_akita = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 " SRC_URI_append_c7x0 = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 " SRC_URI_append_collie = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 " -- 1.7.4.1