From: Jarkko Nikula Subject: [PATCH 1/2] ASoC: tlv320aic3x: Don't sync first two registers from register cache Date: Fri, 20 May 2011 16:52:37 +0300 Message-ID: <1305899558-21719-1-git-send-email-jhnikula@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mail-ey0-f179.google.com (mail-ey0-f179.google.com [209.85.215.179]) by alsa0.perex.cz (Postfix) with ESMTP id 70A90103842 for ; Fri, 20 May 2011 15:51:19 +0200 (CEST) Received: by eyg5 with SMTP id 5so1296110eyg.38 for ; Fri, 20 May 2011 06:51:19 -0700 (PDT) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org Cc: Mark Brown , Liam Girdwood List-Id: alsa-devel@alsa-project.org There is no need to sync first two registers from cache to hw after a reset. First one is used to select page for register access and this driver is normally accessing page 0 only. Second one does a software reset which is obviously unneeded after hardware or previous software reset command. Signed-off-by: Jarkko Nikula --- sound/soc/codecs/tlv320aic3x.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index c3d96fc..9047bb1 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1114,7 +1114,7 @@ static int aic3x_set_power(struct snd_soc_codec *codec, int power) /* Sync reg_cache with the hardware */ codec->cache_only = 0; - for (i = 0; i < ARRAY_SIZE(aic3x_reg); i++) + for (i = AIC3X_SAMPLE_RATE_SEL_REG; i < ARRAY_SIZE(aic3x_reg); i++) snd_soc_write(codec, i, cache[i]); if (aic3x->model == AIC3X_MODEL_3007) aic3x_init_3007(codec); -- 1.7.4.4