From: Mark Brown Subject: [PATCH] ASoC: Use a lower detection rate when monitoring headphones on WM8915 Date: Wed, 1 Jun 2011 20:17:19 +0100 Message-ID: <1306955839-12097-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource2.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id 5250C2450D for ; Wed, 1 Jun 2011 21:17:23 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org We only need to increase the detection rate to maximum if we're monitoring for button presses as the response times needed for user interaction there are much lower. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8915.c | 20 ++++++++++++++------ 1 files changed, 14 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/wm8915.c b/sound/soc/codecs/wm8915.c index 5ff6a77..5a59ef7 100644 --- a/sound/soc/codecs/wm8915.c +++ b/sound/soc/codecs/wm8915.c @@ -2288,6 +2288,12 @@ static void wm8915_micd(struct snd_soc_codec *codec) SND_JACK_HEADSET | SND_JACK_BTN_0); wm8915->jack_mic = true; wm8915->detecting = false; + + /* Increase poll rate to give better responsiveness + * for buttons */ + snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, + WM8915_MICD_RATE_MASK, + 5 << WM8915_MICD_RATE_SHIFT); } /* If we detected a lower impedence during initial startup @@ -2328,15 +2334,17 @@ static void wm8915_micd(struct snd_soc_codec *codec) SND_JACK_HEADPHONE, SND_JACK_HEADSET | SND_JACK_BTN_0); + + /* Increase the detection rate a bit for + * responsiveness. + */ + snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, + WM8915_MICD_RATE_MASK, + 7 << WM8915_MICD_RATE_SHIFT); + wm8915->detecting = false; } } - - /* Increase poll rate to give better responsiveness for buttons */ - if (!wm8915->detecting) - snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, - WM8915_MICD_RATE_MASK, - 5 << WM8915_MICD_RATE_SHIFT); } static irqreturn_t wm8915_irq(int irq, void *data) -- 1.7.5.3