From: Mark Brown Subject: [PATCH 1/2] ASoC: Acknowledge WM8996 interrupts before acting on them Date: Wed, 20 Jul 2011 13:50:38 +0100 Message-ID: <1311166239-16544-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource2.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id E344524417 for ; Wed, 20 Jul 2011 14:50:44 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org This closes the small race between a status being read in response to an interrupt and clearing the interrupt, meaning that if the status changes between those periods we might not get a reassertion of the interrupt. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 00f9ace..ab8e9d1 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -2404,6 +2404,8 @@ static irqreturn_t wm8996_irq(int irq, void *data) } irq_val &= ~snd_soc_read(codec, WM8996_INTERRUPT_STATUS_2_MASK); + snd_soc_write(codec, WM8996_INTERRUPT_STATUS_2, irq_val); + if (irq_val & (WM8996_DCS_DONE_01_EINT | WM8996_DCS_DONE_23_EINT)) { dev_dbg(codec->dev, "DC servo IRQ\n"); complete(&wm8996->dcs_done); @@ -2420,13 +2422,10 @@ static irqreturn_t wm8996_irq(int irq, void *data) if (irq_val & WM8996_MICD_EINT) wm8996_micd(codec); - if (irq_val) { - snd_soc_write(codec, WM8996_INTERRUPT_STATUS_2, irq_val); - + if (irq_val) return IRQ_HANDLED; - } else { + else return IRQ_NONE; - } } static irqreturn_t wm8996_edge_irq(int irq, void *data) -- 1.7.5.4