From: Mark Brown Subject: [PATCH] ASoC: Optimise WM8996 no interrupt path Date: Sat, 20 Aug 2011 19:33:09 +0100 Message-ID: <1313865189-3037-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource2.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id 28D9610383D for ; Sat, 20 Aug 2011 20:33:12 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org This occurs frequently if we are in edge triggered mode as we must poll the interrupt status register until we get no more interrupts so it's worth the effort - it means we skip writing null acknowledgements to the chip. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index d3277d1..73a1588 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -2416,6 +2416,9 @@ static irqreturn_t wm8996_irq(int irq, void *data) } irq_val &= ~snd_soc_read(codec, WM8996_INTERRUPT_STATUS_2_MASK); + if (!irq_val) + return IRQ_NONE; + snd_soc_write(codec, WM8996_INTERRUPT_STATUS_2, irq_val); if (irq_val & (WM8996_DCS_DONE_01_EINT | WM8996_DCS_DONE_23_EINT)) { @@ -2434,10 +2437,7 @@ static irqreturn_t wm8996_irq(int irq, void *data) if (irq_val & WM8996_MICD_EINT) wm8996_micd(codec); - if (irq_val) - return IRQ_HANDLED; - else - return IRQ_NONE; + return IRQ_HANDLED; } static irqreturn_t wm8996_edge_irq(int irq, void *data) -- 1.7.5.4