From: Mark Brown Subject: [PATCH] ASoC: Ensure we get an impedence reported for WM8958 jack detect Date: Sun, 21 Aug 2011 13:28:05 +0100 Message-ID: <1313929685-13322-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource2.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id A4E2F24378 for ; Sun, 21 Aug 2011 14:28:12 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: Mark Brown --- include/linux/mfd/wm8994/registers.h | 15 +++++++++++++ sound/soc/codecs/wm8994.c | 37 +++++++++++++++++++++++---------- 2 files changed, 41 insertions(+), 11 deletions(-) diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h index d7be463..10c483f 100644 --- a/include/linux/mfd/wm8994/registers.h +++ b/include/linux/mfd/wm8994/registers.h @@ -1967,6 +1967,21 @@ #define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */ /* + * R210 (0xD2) - Mic Detect 3 + */ +#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */ +#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */ +#define WM8958_MICD_STS 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */ +#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */ + +/* * R76 (0x4C) - Charge Pump (1) */ #define WM8994_CP_ENA 0x8000 /* CP_ENA */ diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 5e8d66d..a26cee1 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3043,19 +3043,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) { struct wm8994_priv *wm8994 = data; struct snd_soc_codec *codec = wm8994->codec; - int reg; + int reg, count; - reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); - if (reg < 0) { - dev_err(codec->dev, "Failed to read mic detect status: %d\n", - reg); - return IRQ_NONE; - } + /* We may occasionally read a detection without an impedence + * range being provided - if that happens loop again. + */ + count = 10; + do { + reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); + if (reg < 0) { + dev_err(codec->dev, + "Failed to read mic detect status: %d\n", + reg); + return IRQ_NONE; + } - if (!(reg & WM8958_MICD_VALID)) { - dev_dbg(codec->dev, "Mic detect data not valid\n"); - goto out; - } + if (!(reg & WM8958_MICD_VALID)) { + dev_dbg(codec->dev, "Mic detect data not valid\n"); + goto out; + } + + if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK)) + break; + + msleep(1); + } while (count--); + + if (count == 0) + dev_warn(codec->dev, "No impedence range reported for jack\n"); #ifndef CONFIG_SND_SOC_WM8994_MODULE trace_snd_soc_jack_irq(dev_name(codec->dev)); -- 1.7.5.4