From: Mark Brown Subject: [PATCH] ASoC: Refcount WM8996 bandgap from FLL too Date: Mon, 19 Sep 2011 18:56:32 +0100 Message-ID: <1316454992-9878-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource2.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id 2DF66243FD for ; Mon, 19 Sep 2011 19:56:36 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org For digital only paths we need to make sure the bandgap is enabled prior to starting the FLL which isn't tied into DAPM. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 46 +++++++++++++++++++++++++++++++++++++++----- 1 files changed, 40 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index c587b4d..071dda0 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -72,6 +72,7 @@ struct wm8996_priv { struct regulator_bulk_data supplies[WM8996_NUM_SUPPLIES]; struct notifier_block disable_nb[WM8996_NUM_SUPPLIES]; struct regulator *cpvdd; + int bg_ena; struct wm8996_pdata pdata; @@ -667,14 +668,40 @@ SOC_SINGLE_TLV("DSP2 EQ B5 Volume", WM8996_DSP2_RX_EQ_GAINS_2, 6, 31, 0, eq_tlv), }; +static void wm8996_bg_enable(struct snd_soc_codec *codec) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + + wm8996->bg_ena++; + if (wm8996->bg_ena == 1) { + snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1, + WM8996_BG_ENA, WM8996_BG_ENA); + msleep(2); + } +} + +static void wm8996_bg_disable(struct snd_soc_codec *codec) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + + wm8996->bg_ena--; + if (!wm8996->bg_ena) + snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1, + WM8996_BG_ENA, 0); +} + static int bg_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { + struct snd_soc_codec *codec = w->codec; int ret = 0; switch (event) { - case SND_SOC_DAPM_POST_PMU: - msleep(2); + case SND_SOC_DAPM_PRE_PMU: + wm8996_bg_enable(codec); + break; + case SND_SOC_DAPM_POST_PMD: + wm8996_bg_disable(codec); break; default: BUG(); @@ -1015,10 +1042,10 @@ SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8996_AIF_CLOCKING_1, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_POST_PMD), -SND_SOC_DAPM_SUPPLY("Bandgap", WM8996_POWER_MANAGEMENT_1, WM8996_BG_ENA_SHIFT, - 0, bg_event, SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_SUPPLY("Bandgap", SND_SOC_NOPM, 0, 0, bg_event, + SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("MICB1 Audio", WM8996_MICBIAS_1, 4, 1, NULL, 0), SND_SOC_DAPM_SUPPLY("MICB2 Audio", WM8996_MICBIAS_2, 4, 1, NULL, 0), @@ -2095,6 +2122,8 @@ static int wm8996_set_fll(struct snd_soc_codec *codec, int fll_id, int source, snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1, WM8996_FLL_ENA, 0); + wm8996_bg_disable(codec); + return 0; } @@ -2149,6 +2178,11 @@ static int wm8996_set_fll(struct snd_soc_codec *codec, int fll_id, int source, snd_soc_write(codec, WM8996_FLL_EFS_1, fll_div.lambda); + /* Enable the bandgap if it's not already enabled */ + ret = snd_soc_read(codec, WM8996_FLL_CONTROL_1); + if (!(ret & WM8996_FLL_ENA)) + wm8996_bg_enable(codec); + /* Clear any pending completions (eg, from failed startups) */ try_wait_for_completion(&wm8996->fll_lock); -- 1.7.6.3