From: Peter Ujfalusi Subject: [PATCH v2 01/10] ASoC: twl6040: Lower the power on gain values at startup Date: Thu, 22 Sep 2011 11:05:45 +0300 Message-ID: <1316678754-11935-2-git-send-email-peter.ujfalusi@ti.com> References: <1316678754-11935-1-git-send-email-peter.ujfalusi@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from na3sys009aog126.obsmtp.com (na3sys009aog126.obsmtp.com [74.125.149.155]) by alsa0.perex.cz (Postfix) with ESMTP id 138FF103B08 for ; Thu, 22 Sep 2011 10:06:31 +0200 (CEST) Received: by mail-bw0-f45.google.com with SMTP id zv15so2937968bkb.32 for ; Thu, 22 Sep 2011 01:06:18 -0700 (PDT) In-Reply-To: <1316678754-11935-1-git-send-email-peter.ujfalusi@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Mark Brown , Liam Girdwood Cc: alsa-devel@alsa-project.org, Misael Lopez Cruz List-Id: alsa-devel@alsa-project.org The default gains on outputs/inputs are set to 0dB. This is fixing the pop noise issue at the first playback, which caused by the wrong starting point of the ramp code. The ramp code for the outputs expects the gains to be in their lowest configuration in order to be effective. After the playback stops, the ramp code takes care of ramping down the gains to their minimum. Signed-off-by: Peter Ujfalusi Acked-by: Liam Girdwood --- sound/soc/codecs/twl6040.c | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c index 81645c6..0694d65 100644 --- a/sound/soc/codecs/twl6040.c +++ b/sound/soc/codecs/twl6040.c @@ -269,6 +269,17 @@ static void twl6040_init_chip(struct snd_soc_codec *codec) /* No imput selected for microphone amplifiers */ twl6040_write_reg_cache(codec, TWL6040_REG_MICLCTL, 0x18); twl6040_write_reg_cache(codec, TWL6040_REG_MICRCTL, 0x18); + + /* + * We need to lower the default gain values, so the ramp code + * can work correctly for the first playback. + * This reduces the pop noise heard at the first playback. + */ + twl6040_write_reg_cache(codec, TWL6040_REG_HSGAIN, 0xff); + twl6040_write_reg_cache(codec, TWL6040_REG_EARCTL, 0x1e); + twl6040_write_reg_cache(codec, TWL6040_REG_HFLGAIN, 0x1d); + twl6040_write_reg_cache(codec, TWL6040_REG_HFRGAIN, 0x1d); + twl6040_write_reg_cache(codec, TWL6040_REG_LINEGAIN, 0); } static void twl6040_restore_regs(struct snd_soc_codec *codec) -- 1.7.6.1