From: Simon Glass Date: Thu, 20 Oct 2011 12:03:22 -0700 Subject: [U-Boot] [PATCH 1/8] tegra2: Tidy UART selection In-Reply-To: <1319137409-4132-1-git-send-email-sjg@chromium.org> References: <1319137409-4132-1-git-send-email-sjg@chromium.org> Message-ID: <1319137409-4132-2-git-send-email-sjg@chromium.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de UART selection is done with a lot of #ifdefs. This cleans things up a little. Signed-off-by: Simon Glass --- board/nvidia/common/board.c | 57 +++++++++++++++++++++++++----------------- 1 files changed, 34 insertions(+), 23 deletions(-) diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 0f12de2..a5da310 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -35,6 +35,12 @@ DECLARE_GLOBAL_DATA_PTR; +enum { + /* UARTs which we can enable */ + UARTA = 1 << 0, + UARTD = 1 << 3, +}; + const struct tegra2_sysinfo sysinfo = { CONFIG_TEGRA2_BOARD_STRING }; @@ -64,36 +70,32 @@ static void enable_uart(enum periph_id pid) /* * Routine: clock_init_uart - * Description: init the PLL and clock for the UART(s) + * Description: init clock for the UART(s) */ -static void clock_init_uart(void) +static void clock_init_uart(int uart_ids) { -#if defined(CONFIG_TEGRA2_ENABLE_UARTA) - enable_uart(PERIPH_ID_UART1); -#endif /* CONFIG_TEGRA2_ENABLE_UARTA */ -#if defined(CONFIG_TEGRA2_ENABLE_UARTD) - enable_uart(PERIPH_ID_UART4); -#endif /* CONFIG_TEGRA2_ENABLE_UARTD */ + if (uart_ids & UARTA) + enable_uart(PERIPH_ID_UART1); + if (uart_ids & UARTD) + enable_uart(PERIPH_ID_UART4); } /* * Routine: pin_mux_uart * Description: setup the pin muxes/tristate values for the UART(s) */ -static void pin_mux_uart(void) +static void pin_mux_uart(int uart_ids) { -#if defined(CONFIG_TEGRA2_ENABLE_UARTA) - pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA); - pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA); - - pinmux_tristate_disable(PINGRP_IRRX); - pinmux_tristate_disable(PINGRP_IRTX); -#endif /* CONFIG_TEGRA2_ENABLE_UARTA */ -#if defined(CONFIG_TEGRA2_ENABLE_UARTD) - pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD); - - pinmux_tristate_disable(PINGRP_GMC); -#endif /* CONFIG_TEGRA2_ENABLE_UARTD */ + if (uart_ids & UARTA) { + pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA); + pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA); + pinmux_tristate_disable(PINGRP_IRRX); + pinmux_tristate_disable(PINGRP_IRTX); + } + if (uart_ids & UARTD) { + pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD); + pinmux_tristate_disable(PINGRP_GMC); + } } /* @@ -114,14 +116,23 @@ int board_init(void) #ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { + int uart_ids = 0; /* bit mask of which UART ids to enable */ + +#ifdef CONFIG_TEGRA2_ENABLE_UARTA + uart_ids |= UARTA; +#endif +#ifdef CONFIG_TEGRA2_ENABLE_UARTD + uart_ids |= UARTD; +#endif + /* Initialize essential common plls */ clock_early_init(); /* Initialize UART clocks */ - clock_init_uart(); + clock_init_uart(uart_ids); /* Initialize periph pinmuxes */ - pin_mux_uart(); + pin_mux_uart(uart_ids); /* Initialize periph GPIOs */ gpio_config_uart(); -- 1.7.3.1