From: Mark Brown Subject: [PATCH 5/6] ASoC: Add platform data for WM8958/WM1811 microphone detection rates Date: Thu, 1 Dec 2011 14:16:45 +0000 Message-ID: <1322749006-371-5-git-send-email-broonie@opensource.wolfsonmicro.com> References: <1322749006-371-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id 1EA68103C07 for ; Thu, 1 Dec 2011 15:17:10 +0100 (CET) In-Reply-To: <1322749006-371-1-git-send-email-broonie@opensource.wolfsonmicro.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org Allow systems to override the default microphone detection rates using platform data in case the settings are not suitable (eg, due to an unusually noisy jack). Signed-off-by: Mark Brown --- include/linux/mfd/wm8994/pdata.h | 20 ++++++++++++++++++++ sound/soc/codecs/wm8994.c | 12 ++++-------- 2 files changed, 24 insertions(+), 8 deletions(-) diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index d46c55a..3fb1f40 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -113,6 +113,23 @@ struct wm8958_enh_eq_cfg { u16 regs[WM8958_ENH_EQ_REGS]; }; +/** + * Microphone detection rates, used to tune response rates and power + * consumption for WM8958/WM1811 microphone detection. + * + * @sysclk: System clock rate to use this configuration for. + * @idle: True if this configuration should use when no accessory is detected, + * false otherwise. + * @start: Value for MICD_BIAS_START_TIME register field (not shifted). + * @rate: Value for MICD_RATE register field (not shifted). + */ +struct wm8958_micd_rate { + int sysclk; + bool idle; + int start; + int rate; +}; + struct wm8994_pdata { int gpio_base; @@ -144,6 +161,9 @@ struct wm8994_pdata { int num_enh_eq_cfgs; struct wm8958_enh_eq_cfg *enh_eq_cfgs; + int num_micd_rates; + struct wm8958_micd_rate *micd_rates; + /* LINEOUT can be differential or single ended */ unsigned int lineout1_diff:1; unsigned int lineout2_diff:1; diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 72282da..aea5100 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -60,13 +60,6 @@ static int wm8994_retune_mobile_base[] = { static void wm8958_default_micdet(u16 status, void *data); -struct wm8958_micd_rate { - int sysclk; - bool idle; - int start; - int rate; -}; - static const struct wm8958_micd_rate micdet_rates[] = { { 32768, true, 1, 4 }, { 32768, false, 1, 1 }, @@ -100,7 +93,10 @@ static void wm8958_micd_set_rate(struct snd_soc_codec *codec) else sysclk = wm8994->aifclk[0]; - if (wm8994->jackdet) { + if (wm8994->pdata && wm8994->pdata->micd_rates) { + rates = wm8994->pdata->micd_rates; + num_rates = wm8994->pdata->num_micd_rates; + } else if (wm8994->jackdet) { rates = jackdet_rates; num_rates = ARRAY_SIZE(jackdet_rates); } else { -- 1.7.7.3