Received: from smtp2-g21.free.fr ([212.27.42.2]) by linuxtogo.org with esmtp (Exim 4.72) (envelope-from ) id 1RWUr7-0002pk-0D for openembedded-devel@lists.openembedded.org; Fri, 02 Dec 2011 16:16:53 +0100 Received: from e6520eb.lan (unknown [82.240.38.71]) by smtp2-g21.free.fr (Postfix) with ESMTP id 19E774B0052; Fri, 2 Dec 2011 16:10:07 +0100 (CET) From: =?UTF-8?q?Eric=20B=C3=A9nard?= To: openembedded-devel@lists.openembedded.org Date: Fri, 2 Dec 2011 16:09:57 +0100 Message-Id: <1322838598-30090-3-git-send-email-eric@eukrea.com> X-Mailer: git-send-email 1.7.6.4 In-Reply-To: <1322838598-30090-1-git-send-email-eric@eukrea.com> References: <1322838598-30090-1-git-send-email-eric@eukrea.com> MIME-Version: 1.0 Cc: =?UTF-8?q?Eric=20B=C3=A9nard?= Subject: [meta-oe v2 3/4] add net-snmp-5.7.1 X-BeenThere: openembedded-devel@lists.openembedded.org X-Mailman-Version: 2.1.11 Precedence: list Reply-To: openembedded-devel@lists.openembedded.org List-Id: Using the OpenEmbedded metadata to build Distributions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Dec 2011 15:16:53 -0000 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable the recipe was imported from OE-classic and upgraded to latest stable. Signed-off-by: Eric B=C3=A9nard --- meta-oe/recipes-extended/net-snmp/files/init | 63 +++ meta-oe/recipes-extended/net-snmp/files/snmpd.conf | 422 ++++++++++++++= ++++++ .../recipes-extended/net-snmp/files/snmptrapd.conf | 18 + meta-oe/recipes-extended/net-snmp/net-snmp.inc | 66 +++ .../recipes-extended/net-snmp/net-snmp_5.7.1.bb | 26 ++ 5 files changed, 595 insertions(+), 0 deletions(-) create mode 100755 meta-oe/recipes-extended/net-snmp/files/init create mode 100644 meta-oe/recipes-extended/net-snmp/files/snmpd.conf create mode 100644 meta-oe/recipes-extended/net-snmp/files/snmptrapd.con= f create mode 100644 meta-oe/recipes-extended/net-snmp/net-snmp.inc create mode 100644 meta-oe/recipes-extended/net-snmp/net-snmp_5.7.1.bb diff --git a/meta-oe/recipes-extended/net-snmp/files/init b/meta-oe/recip= es-extended/net-snmp/files/init new file mode 100755 index 0000000..434b2fa --- /dev/null +++ b/meta-oe/recipes-extended/net-snmp/files/init @@ -0,0 +1,63 @@ +#! /bin/sh +# /etc/init.d/snmpd: start snmp daemon. + +test -x /usr/sbin/snmpd || exit 0 +test -x /usr/sbin/snmptrapd || exit 0 + +# Defaults +export MIBDIRS=3D/usr/share/snmp/mibs +SNMPDRUN=3Dyes +SNMPDOPTS=3D'-Lsd -Lf /dev/null -p /var/run/snmpd.pid' +TRAPDRUN=3Dno +TRAPDOPTS=3D'-Lsd -p /var/run/snmptrapd.pid' + +# Cd to / before starting any daemons. +cd / + +case "$1" in + start) + echo -n "Starting network management services:" + if [ "$SNMPDRUN" =3D "yes" -a -f /etc/snmp/snmpd.conf ]; then + start-stop-daemon -S -x /usr/sbin/snmpd \ + -- $SNMPDOPTS + echo -n " snmpd" + fi + if [ "$TRAPDRUN" =3D "yes" -a -f /etc/snmp/snmptrapd.conf ]; then + start-stop-daemon -S -x /usr/sbin/snmptrapd \ + -- $TRAPDOPTS + echo -n " snmptrapd" + fi + echo "." + ;; + stop) + echo -n "Stopping network management services:" + start-stop-daemon -K -x /usr/sbin/snmpd + echo -n " snmpd" + start-stop-daemon -K -x /usr/sbin/snmptrapd + echo -n " snmptrapd" + echo "." + ;; + restart|reload|force-reload) + echo -n "Restarting network management services:" + start-stop-daemon -K -x /usr/sbin/snmpd + start-stop-daemon -K -x /usr/sbin/snmptrapd + # Allow the daemons time to exit completely. + sleep 2 + if [ "$SNMPDRUN" =3D "yes" -a -f /etc/snmp/snmpd.conf ]; then + start-stop-daemon -S -x /usr/sbin/snmpd -- $SNMPDOPTS + echo -n " snmpd" + fi + if [ "$TRAPDRUN" =3D "yes" -a -f /etc/snmp/snmptrapd.conf ]; then + # Allow snmpd time to start up. + sleep 1 + start-stop-daemon -S -x /usr/sbin/snmptrapd -- $TRAPDOPTS + echo -n " snmptrapd" + fi + echo "." + ;; + *) + echo "Usage: /etc/init.d/snmpd {start|stop|restart|reload|force-relo= ad}" + exit 1 +esac + +exit 0 diff --git a/meta-oe/recipes-extended/net-snmp/files/snmpd.conf b/meta-oe= /recipes-extended/net-snmp/files/snmpd.conf new file mode 100644 index 0000000..728171c --- /dev/null +++ b/meta-oe/recipes-extended/net-snmp/files/snmpd.conf @@ -0,0 +1,422 @@ +########################################################################= ####### +# +# EXAMPLE.conf: +# An example configuration file for configuring the ucd-snmp snmpd age= nt. +# +########################################################################= ####### +# +# This file is intended to only be an example. If, however, you want +# to use it, it should be placed in /etc/snmp/snmpd.conf. +# When the snmpd agent starts up, this is where it will look for it. +# +# You might be interested in generating your own snmpd.conf file using +# the "snmpconf" program (perl script) instead. It's a nice menu +# based interface to writing well commented configuration files. Try it= ! +# +# Note: This file is automatically generated from EXAMPLE.conf.def. +# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run +# configure & make, and then make sure you read the EXAMPLE.conf file +# instead, as it will tailor itself to your configuration. + +# All lines beginning with a '#' are comments and are intended for you +# to read. All other lines are configuration commands for the agent. + +# +# PLEASE: read the snmpd.conf(5) manual page as well! +# + + +########################################################################= ####### +# Access Control +########################################################################= ####### + +# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY +# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO +# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE. + +# By far, the most common question I get about the agent is "why won't +# it work?", when really it should be "how do I configure the agent to +# allow me to access it?" +# +# By default, the agent responds to the "public" community for read +# only access, if run out of the box without any configuration file in=20 +# place. The following examples show you other ways of configuring +# the agent so that you can change the community names, and give +# yourself write access as well. +# +# The following lines change the access permissions of the agent so +# that the COMMUNITY string provides read-only access to your entire +# NETWORK (EG: 10.10.10.0/24), and read/write access to only the +# localhost (127.0.0.1, not its real ipaddress). +# +# For more information, read the FAQ as well as the snmpd.conf(5) +# manual page. + +#### +# First, map the community name (COMMUNITY) into a security name +# (local and mynetwork, depending on where the request is coming +# from): + +# sec.name source community +com2sec paranoid default public +#com2sec readonly default public +#com2sec readwrite default private + +#### +# Second, map the security names into group names: + +# sec.model sec.name +group MyROSystem v1 paranoid +group MyROSystem v2c paranoid +group MyROSystem usm paranoid +group MyROGroup v1 readonly +group MyROGroup v2c readonly +group MyROGroup usm readonly +group MyRWGroup v1 readwrite +group MyRWGroup v2c readwrite +group MyRWGroup usm readwrite + +#### +# Third, create a view for us to let the groups have rights to: + +# incl/excl subtree mask +view all included .1 80 +view system included .iso.org.dod.internet.mgmt.mib-2.system + +#### +# Finally, grant the 2 groups access to the 1 view with different +# write permissions: + +# context sec.model sec.level match read write notif +access MyROSystem "" any noauth exact system none none +access MyROGroup "" any noauth exact all none none +access MyRWGroup "" any noauth exact all all none + +# ----------------------------------------------------------------------= ------- + + +########################################################################= ####### +# System contact information +# + +# It is also possible to set the sysContact and sysLocation system +# variables through the snmpd.conf file. **PLEASE NOTE** that setting +# the value of these objects here makes these objects READ-ONLY +# (regardless of any access control settings). Any attempt to set the +# value of an object whose value is given here will fail with an error +# status of notWritable. + +syslocation Unknown (configure /etc/snmp/snmpd.local.conf) +syscontact Root (configure /etc/snmp/snmpd.local.conf) + +# Example output of snmpwalk: +# % snmpwalk -v 1 -c public localhost system +# system.sysDescr.0 =3D "SunOS name sun4c" +# system.sysObjectID.0 =3D OID: enterprises.ucdavis.ucdSnmpAgent.sunos= 4 +# system.sysUpTime.0 =3D Timeticks: (595637548) 68 days, 22:32:55 +# system.sysContact.0 =3D "Me " +# system.sysName.0 =3D "name" +# system.sysLocation.0 =3D "Right here, right now." +# system.sysServices.0 =3D 72 + + +# ----------------------------------------------------------------------= ------- + + +########################################################################= ####### +# Process checks. +# +# The following are examples of how to use the agent to check for +# processes running on the host. The syntax looks something like: +# +# proc NAME [MAX=3D0] [MIN=3D0] +# +# NAME: the name of the process to check for. It must match +# exactly (ie, http will not find httpd processes). +# MAX: the maximum number allowed to be running. Defaults to 0. +# MIN: the minimum number to be running. Defaults to 0. + +# +# Examples: +# + +# Make sure mountd is running +#proc mountd + +# Make sure there are no more than 4 ntalkds running, but 0 is ok too. +#proc ntalkd 4 + +# Make sure at least one sendmail, but less than or equal to 10 are run= ning. +#proc sendmail 10 1 + +# A snmpwalk of the prTable would look something like this: +#=20 +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2 +# enterprises.ucdavis.procTable.prEntry.prIndex.1 =3D 1 +# enterprises.ucdavis.procTable.prEntry.prIndex.2 =3D 2 +# enterprises.ucdavis.procTable.prEntry.prIndex.3 =3D 3 +# enterprises.ucdavis.procTable.prEntry.prNames.1 =3D "mountd" +# enterprises.ucdavis.procTable.prEntry.prNames.2 =3D "ntalkd" +# enterprises.ucdavis.procTable.prEntry.prNames.3 =3D "sendmail" +# enterprises.ucdavis.procTable.prEntry.prMin.1 =3D 0 +# enterprises.ucdavis.procTable.prEntry.prMin.2 =3D 0 +# enterprises.ucdavis.procTable.prEntry.prMin.3 =3D 1 +# enterprises.ucdavis.procTable.prEntry.prMax.1 =3D 0 +# enterprises.ucdavis.procTable.prEntry.prMax.2 =3D 4 +# enterprises.ucdavis.procTable.prEntry.prMax.3 =3D 10 +# enterprises.ucdavis.procTable.prEntry.prCount.1 =3D 0 +# enterprises.ucdavis.procTable.prEntry.prCount.2 =3D 0 +# enterprises.ucdavis.procTable.prEntry.prCount.3 =3D 1 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 =3D 1 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 =3D 0 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 =3D 0 +# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 =3D "No mountd pr= ocess running." +# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 =3D "" +# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 =3D "" +# enterprises.ucdavis.procTable.prEntry.prErrFix.1 =3D 0 +# enterprises.ucdavis.procTable.prEntry.prErrFix.2 =3D 0 +# enterprises.ucdavis.procTable.prEntry.prErrFix.3 =3D 0 +# +# Note that the errorFlag for mountd is set to 1 because one is not +# running (in this case an rpc.mountd is, but thats not good enough), +# and the ErrMessage tells you what's wrong. The configuration +# imposed in the snmpd.conf file is also shown. =20 +#=20 +# Special Case: When the min and max numbers are both 0, it assumes +# you want a max of infinity and a min of 1. +# + + +# ----------------------------------------------------------------------= ------- + + +########################################################################= ####### +# Executables/scripts +# + +# +# You can also have programs run by the agent that return a single +# line of output and an exit code. Here are two examples. +# +# exec NAME PROGRAM [ARGS ...] +# +# NAME: A generic name. +# PROGRAM: The program to run. Include the path! +# ARGS: optional arguments to be passed to the program + +# a simple hello world +#exec echotest /bin/echo hello world + +# Run a shell script containing: +# +# #!/bin/sh +# echo hello world +# echo hi there +# exit 35 +# +# Note: this has been specifically commented out to prevent +# accidental security holes due to someone else on your system writing +# a /tmp/shtest before you do. Uncomment to use it. +# +#exec shelltest /bin/sh /tmp/shtest + +# Then,=20 +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8 +# enterprises.ucdavis.extTable.extEntry.extIndex.1 =3D 1 +# enterprises.ucdavis.extTable.extEntry.extIndex.2 =3D 2 +# enterprises.ucdavis.extTable.extEntry.extNames.1 =3D "echotest" +# enterprises.ucdavis.extTable.extEntry.extNames.2 =3D "shelltest" +# enterprises.ucdavis.extTable.extEntry.extCommand.1 =3D "/bin/echo hell= o world" +# enterprises.ucdavis.extTable.extEntry.extCommand.2 =3D "/bin/sh /tmp/s= htest" +# enterprises.ucdavis.extTable.extEntry.extResult.1 =3D 0 +# enterprises.ucdavis.extTable.extEntry.extResult.2 =3D 35 +# enterprises.ucdavis.extTable.extEntry.extOutput.1 =3D "hello world." +# enterprises.ucdavis.extTable.extEntry.extOutput.2 =3D "hello world." +# enterprises.ucdavis.extTable.extEntry.extErrFix.1 =3D 0 +# enterprises.ucdavis.extTable.extEntry.extErrFix.2 =3D 0 + +# Note that the second line of the /tmp/shtest shell script is cut +# off. Also note that the exit status of 35 was returned. + +# ----------------------------------------------------------------------= ------- + + +########################################################################= ####### +# disk checks +# + +# The agent can check the amount of available disk space, and make +# sure it is above a set limit. =20 + +# disk PATH [MIN=3DDEFDISKMINIMUMSPACE] +# +# PATH: mount path to the disk in question. +# MIN: Disks with space below this value will have the Mib's errorFlag= set. +# Default value =3D DEFDISKMINIMUMSPACE. + +# Check the / partition and make sure it contains at least 10 megs. + +#disk / 10000 + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9 +# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 =3D 0 +# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 =3D "/" Hex: 2F=20 +# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 =3D "/dev/dsk/c201= d6s0" +# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 =3D 10000 +# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 =3D 837130 +# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 =3D 316325 +# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 =3D 437092 +# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 =3D 58 +# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 =3D 0 +# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 =3D "" + +# ----------------------------------------------------------------------= ------- + + +########################################################################= ####### +# load average checks +# + +# load [1MAX=3DDEFMAXLOADAVE] [5MAX=3DDEFMAXLOADAVE] [15MAX=3DDEFMAXLOAD= AVE] +# +# 1MAX: If the 1 minute load average is above this limit at query +# time, the errorFlag will be set. +# 5MAX: Similar, but for 5 min average. +# 15MAX: Similar, but for 15 min average. + +# Check for loads: +#load 12 14 14 + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 =3D 1 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 =3D 2 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 =3D 3 +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 =3D "Load-1" +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 =3D "Load-5" +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 =3D "Load-15" +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 =3D "0.49" Hex: 30= 2E 34 39=20 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 =3D "0.31" Hex: 30= 2E 33 31=20 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 =3D "0.26" Hex: 30= 2E 32 36=20 +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 =3D "12.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 =3D "14.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 =3D "14.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 =3D 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 =3D 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 =3D 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 =3D "" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 =3D "" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 =3D "" + +# ----------------------------------------------------------------------= ------- + + +########################################################################= ####### +# Extensible sections. +#=20 + +# This alleviates the multiple line output problem found in the +# previous executable mib by placing each mib in its own mib table: + +# Run a shell script containing: +# +# #!/bin/sh +# echo hello world +# echo hi there +# exit 35 +# +# Note: this has been specifically commented out to prevent +# accidental security holes due to someone else on your system writing +# a /tmp/shtest before you do. Uncomment to use it. +# +# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50 +# enterprises.ucdavis.50.1.1 =3D 1 +# enterprises.ucdavis.50.2.1 =3D "shelltest" +# enterprises.ucdavis.50.3.1 =3D "/bin/sh /tmp/shtest" +# enterprises.ucdavis.50.100.1 =3D 35 +# enterprises.ucdavis.50.101.1 =3D "hello world." +# enterprises.ucdavis.50.101.2 =3D "hi there." +# enterprises.ucdavis.50.102.1 =3D 0 + +# Now the Output has grown to two lines, and we can see the 'hi +# there.' output as the second line from our shell script. +# +# Note that you must alter the mib.txt file to be correct if you want +# the .50.* outputs above to change to reasonable text descriptions. + +# Other ideas: +#=20 +# exec .1.3.6.1.4.1.2021.51 ps /bin/ps=20 +# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top +# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq + +# ----------------------------------------------------------------------= ------- + + +########################################################################= ####### +# Pass through control. +#=20 + +# Usage: +# pass MIBOID EXEC-COMMAND +# +# This will pass total control of the mib underneath the MIBOID +# portion of the mib to the EXEC-COMMAND. =20 +# +# Note: You'll have to change the path of the passtest script to your +# source directory or install it in the given location. +#=20 +# Example: (see the script for details) +# (commented out here since it requires that you place the +# script in the right location. (its not installed by default)= ) + +# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/passtest + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255 +# enterprises.ucdavis.255.1 =3D "life the universe and everything" +# enterprises.ucdavis.255.2.1 =3D 42 +# enterprises.ucdavis.255.2.2 =3D OID: 42.42.42 +# enterprises.ucdavis.255.3 =3D Timeticks: (363136200) 42 days, 0:42:42 +# enterprises.ucdavis.255.4 =3D IpAddress: 127.0.0.1 +# enterprises.ucdavis.255.5 =3D 42 +# enterprises.ucdavis.255.6 =3D Gauge: 42 +# +# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5 +# enterprises.ucdavis.255.5 =3D 42 +# +# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New stri= ng" +# enterprises.ucdavis.255.1 =3D "New string" +# + +# For specific usage information, see the man/snmpd.conf.5 manual page +# as well as the local/passtest script used in the above example. + +########################################################################= ####### +# Subagent control +# + +# The agent can support subagents using a number of extension mechanisms= . +# From the 4.2.1 release, AgentX support is being compiled in by default= . +# However, this is still experimental code, so should not be used on +# critical production systems. +# Please see the file README.agentx for more details. +# +# If having read, marked, learnt and inwardly digested this information, +# you decide that you do wish to make use of this mechanism, simply +# uncomment the following directive. +# +# master agentx +# +# I repeat - this is *NOT* regarded as suitable for front-line productio= n +# systems, though it is probably stable enough for day-to-day use. +# Probably. +# +# No refunds will be given. + +########################################################################= ####### +# Further Information +# +# See the snmpd.conf manual page, and the output of "snmpd -H". +# MUCH more can be done with the snmpd.conf than is shown as an +# example here. diff --git a/meta-oe/recipes-extended/net-snmp/files/snmptrapd.conf b/met= a-oe/recipes-extended/net-snmp/files/snmptrapd.conf new file mode 100644 index 0000000..8d2e437 --- /dev/null +++ b/meta-oe/recipes-extended/net-snmp/files/snmptrapd.conf @@ -0,0 +1,18 @@ +########################################################################= ####### +# +# EXAMPLE.conf: +# An example configuration file for configuring the ucd-snmp snmptrapd= agent. +# +########################################################################= ####### +# +# This file is intended to only be an example. If, however, you want +# to use it, it should be placed in /etc/snmp/snmptrapd.conf. +# When the snmptrapd agent starts up, this is where it will look for it. +# +# All lines beginning with a '#' are comments and are intended for you +# to read. All other lines are configuration commands for the agent. + +# +# PLEASE: read the snmptrapd.conf(5) manual page as well! +# + diff --git a/meta-oe/recipes-extended/net-snmp/net-snmp.inc b/meta-oe/rec= ipes-extended/net-snmp/net-snmp.inc new file mode 100644 index 0000000..159c374 --- /dev/null +++ b/meta-oe/recipes-extended/net-snmp/net-snmp.inc @@ -0,0 +1,66 @@ +DESCRIPTION =3D "Various tools relating to the Simple Network Management= Protocol" +HOMEPAGE =3D "http://www.net-snmp.org/" +LICENSE =3D "BSD" + +DEPENDS =3D "openssl" +RDEPENDS_${PN}-server +=3D "net-snmp-mibs" +RDEPENDS_${PN}-client +=3D "net-snmp-mibs" +RDEPENDS_${PN}-dev =3D "net-snmp-client (=3D ${EXTENDPV}) net-snmp-serve= r (=3D ${EXTENDPV})" +RRECOMMENDS_${PN}-dbg =3D "net-snmp-client (=3D ${EXTENDPV}) net-snmp-se= rver (=3D ${EXTENDPV})" +INC_PR =3D "r0" + +inherit autotools update-rc.d siteinfo + +TARGET_CC_ARCH +=3D "${LDFLAGS}" + +EXTRA_OECONF =3D "--enable-shared --disable-manuals --with-defaults \ +${@base_conditional('SITEINFO_ENDIANNESS', 'le', '--with-endianness=3Dli= ttle', '--with-endianness=3Dbig', d)}" + +do_install () { + oe_runmake install +} + +do_install_append() { + install -d ${D}${sysconfdir}/snmp + install -d ${D}${sysconfdir}/init.d + install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/snmpd + install -m 644 ${WORKDIR}/snmpd.conf ${D}${sysconfdir}/snmp/ + install -m 644 ${WORKDIR}/snmptrapd.conf ${D}${sysconfdir}/snmp/ + install -d ${STAGING_BINDIR} + install -m 0755 ${D}${bindir}/net-snmp-config ${STAGING_BINDIR}/ + sed -e "s@-I/usr/include@@g" \ + -e "s@^prefix=3D.*@prefix=3D${STAGING_DIR_HOST}@g" \ + -e "s@^exec_prefix=3D.*@exec_prefix=3D${STAGING_DIR_HOST}@g" \ + -e "s@^includedir=3D.*@includedir=3D${STAGING_INCDIR}@g" \ + -e "s@^libdir=3D.*@libdir=3D${STAGING_LIBDIR}@g" \ + -i ${STAGING_BINDIR}/net-snmp-config +} + +PACKAGES =3D "net-snmp-dbg net-snmp-doc net-snmp-dev net-snmp-static net= -snmp-libs \ + net-snmp-mibs net-snmp-server net-snmp-client" + +FILES_${PN}-static =3D "${libdir}/*.a" +FILES_${PN}-libs =3D "${libdir}/*" +FILES_${PN}-mibs =3D "${datadir}/snmp/mibs" +FILES_${PN}-server =3D "${sbindir}/* ${sysconfdir}" +FILES_${PN}-client =3D "${bindir}/* ${datadir}/snmp/" +FILES_${PN}-dbg +=3D "${libdir}/.debug/ ${sbindir}/.debug/ ${bindir}/.de= bug/" +FILES_${PN}-dev +=3D ${bindir}/net-snmp-config ${bindir}/mib2c ${bindir}= /mib2c-update" + +CONFFILES_${PN}-server =3D "${sysconfdir}/snmp/snmpd.conf \ + ${sysconfdir}/snmp/snmptrapd.conf" + +INITSCRIPT_PACKAGES =3D "${PN}-server" +INITSCRIPT_NAME_${PN}-server =3D "snmpd" +INITSCRIPT_PARAMS_${PN}-server =3D "defaults" + +LEAD_SONAME =3D "libnetsnmp.so" + +pkg_postrm_net-snmp-server() { + if test "x$D" !=3D "x"; then + OPT=3D"-r $D " + else + OPT=3D"" + /etc/init.d/snmpd stop + fi +} diff --git a/meta-oe/recipes-extended/net-snmp/net-snmp_5.7.1.bb b/meta-o= e/recipes-extended/net-snmp/net-snmp_5.7.1.bb new file mode 100644 index 0000000..59d8407 --- /dev/null +++ b/meta-oe/recipes-extended/net-snmp/net-snmp_5.7.1.bb @@ -0,0 +1,26 @@ +require net-snmp.inc +PR =3D "${INC_PR}.0" +LIC_FILES_CHKSUM =3D "file://README;beginline=3D3;endline=3D8;md5=3D7f7f= 00ba639ac8e8deb5a622ea24634e" + +SRC_URI =3D "${SOURCEFORGE_MIRROR}/net-snmp/net-snmp-${PV}.tar.gz \ + file://init \ + file://snmpd.conf \ + file://snmptrapd.conf" + +EXTRA_OECONF +=3D "--disable-embedded-perl --with-perl-modules=3Dno" +EXTRA_OEMAKE =3D "INSTALL_PREFIX=3D${D}" + +do_configure_prepend() { + gnu-configize -f + # We better change sources and re-autoconf here, but + # required autoconf is too new for us. + sed -e '/echo.*\".*\\\\.*\"/s/echo/echo -e/g' \ + -e 's/tail -1/tail -n 1/g' \ + -i configure +} + +PARALLEL_MAKE =3D "" +CCACHE =3D "" + +SRC_URI[md5sum] =3D "c95d08fd5d93df0c11a2e1bdf0e01e0b" +SRC_URI[sha256sum] =3D "7c71c9650c65b715356547e20ca2dbe6313944278af8cc19= c32a5337f46b181f" --=20 1.7.6.4