From: Mark Brown Subject: [PATCH 4/8] ASoC: Move WM9090 device identification and reset to I2C probe Date: Wed, 14 Dec 2011 17:00:50 +0800 Message-ID: <1323853254-9020-4-git-send-email-broonie@opensource.wolfsonmicro.com> References: <1323853254-9020-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id C153D245AA for ; Wed, 14 Dec 2011 10:01:14 +0100 (CET) In-Reply-To: <1323853254-9020-1-git-send-email-broonie@opensource.wolfsonmicro.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org Signed-off-by: Mark Brown --- sound/soc/codecs/wm9090.c | 26 ++++++++++++++------------ 1 files changed, 14 insertions(+), 12 deletions(-) diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c index 4be5551..a2b9208 100644 --- a/sound/soc/codecs/wm9090.c +++ b/sound/soc/codecs/wm9090.c @@ -532,18 +532,6 @@ static int wm9090_probe(struct snd_soc_codec *codec) return ret; } - ret = snd_soc_read(codec, WM9090_SOFTWARE_RESET); - if (ret < 0) - return ret; - if (ret != 0x9093) { - dev_err(codec->dev, "Device is not a WM9090, ID=%x\n", ret); - return -EINVAL; - } - - ret = snd_soc_write(codec, WM9090_SOFTWARE_RESET, 0); - if (ret < 0) - return ret; - /* Configure some defaults; they will be written out when we * bring the bias up. */ @@ -631,6 +619,7 @@ static int wm9090_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct wm9090_priv *wm9090; + unsigned int reg; int ret; wm9090 = devm_kzalloc(&i2c->dev, sizeof(*wm9090), GFP_KERNEL); @@ -646,6 +635,19 @@ static int wm9090_i2c_probe(struct i2c_client *i2c, return ret; } + ret = regmap_read(wm9090->regmap, WM9090_SOFTWARE_RESET, ®); + if (ret < 0) + goto err; + if (reg != 0x9093) { + dev_err(&i2c->dev, "Device is not a WM9090, ID=%x\n", ret); + ret = -ENODEV; + goto err; + } + + ret = regmap_write(wm9090->regmap, WM9090_SOFTWARE_RESET, 0); + if (ret < 0) + goto err; + if (i2c->dev.platform_data) memcpy(&wm9090->pdata, i2c->dev.platform_data, sizeof(wm9090->pdata)); -- 1.7.7.3