From: Mark Brown Subject: [PATCH] ASoC: When releasing WM5100 put /RESET into reset Date: Tue, 17 Jan 2012 19:19:15 +0000 Message-ID: <1326827955-30443-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id 10097103A75 for ; Tue, 17 Jan 2012 20:19:22 +0100 (CET) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org Reset is active low, make sure we leave it asserted when release the device. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5100.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 9995d14..0e38a24 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -2901,7 +2901,7 @@ static __devinit int wm5100_i2c_probe(struct i2c_client *i2c, err_reset: wm5100_free_gpio(i2c); if (wm5100->pdata.reset) { - gpio_set_value_cansleep(wm5100->pdata.reset, 1); + gpio_set_value_cansleep(wm5100->pdata.reset, 0); gpio_free(wm5100->pdata.reset); } err_ldo: @@ -2934,7 +2934,7 @@ static __devexit int wm5100_i2c_remove(struct i2c_client *client) snd_soc_unregister_codec(&client->dev); wm5100_free_gpio(client); if (wm5100->pdata.reset) { - gpio_set_value_cansleep(wm5100->pdata.reset, 1); + gpio_set_value_cansleep(wm5100->pdata.reset, 0); gpio_free(wm5100->pdata.reset); } if (wm5100->pdata.ldo_ena) { -- 1.7.7.3