From: Lucas Stach Date: Sun, 19 Aug 2012 18:08:13 +0200 Subject: [U-Boot] =?utf-8?q?=5BPATCH_0/3=5D_Tegra_2_USB_ULPI_series?= Message-ID: <1345392496-28739-1-git-send-email-dev@lynxeye.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de With this series we are able to initialize USB controllers using an external ULPI phy AKA USB2 on Tegra 2 devices. This was tested to work on a Toradex Colibri T20 board, where USB2 is used to access the ASIX ethernet chipset. Testing was done with "tegra20: usb: rework set_host_mode" applied. I did not spot any regressions on the UTMI ports. Patchset is based on top of u-boot-tegra/next Lucas Stach (3): tegra20: complete periph_id enum tegra20: add clock_set_pllout function tegra20: add USB ULPI init code arch/arm/cpu/armv7/tegra20/usb.c | 131 +++++++++++++++++++++++++--- arch/arm/cpu/tegra20-common/clock.c | 26 ++++++ arch/arm/cpu/tegra20-common/warmboot_avp.c | 2 +- arch/arm/include/asm/arch-tegra20/clk_rst.h | 11 ++- arch/arm/include/asm/arch-tegra20/clock.h | 25 ++++++ arch/arm/include/asm/arch-tegra20/usb.h | 29 ++++-- 6 Dateien ge?ndert, 206 Zeilen hinzugef?gt(+), 18 Zeilen entfernt(-) -- 1.7.11.2