From: James Warden Subject: Re: Can module snd-aloop (virtual looback device) be made clock slave of a real audio device ? Date: Tue, 21 Aug 2012 01:28:35 -0700 (PDT) Message-ID: <1345537715.17735.YahooMailNeo@web39305.mail.mud.yahoo.com> References: <1345456315.34107.YahooMailNeo@web39304.mail.mud.yahoo.com> <503210F1.9000800@perex.cz> Reply-To: James Warden Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from nm26-vm4.bullet.mail.ne1.yahoo.com (nm26-vm4.bullet.mail.ne1.yahoo.com [98.138.91.186]) by alsa0.perex.cz (Postfix) with SMTP id 25E78265ED6 for ; Tue, 21 Aug 2012 10:28:35 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: "alsa-devel@alsa-project.org" List-Id: alsa-devel@alsa-project.org ----- Original Message ----- From: Jaroslav Kysela To: alsa-devel@alsa-project.org Cc: warjamy@yahoo.com Sent: Monday, August 20, 2012 12:26 PM Subject: Re: [alsa-devel] Can module snd-aloop (virtual looback device) be = made clock slave of a real audio device ? Date 20.8.2012 11:51, James Warden wrote: >> Hello alsa-devel's, >> = >> A while back, I had written a rather hackish method to hook up the >> ALSA virtual loopback device to jack (jackaudio.org) via Jack clients >> alsa_in / alsa_out so that non jack-aware applications that can >> however use ALSA devices "directly" (via alsa-lib) can have their >> audio stream redirected to jack (see my rather lengthy prose at >> http://alsa.opensrc.org/Jack_and_Loopback_device_as_Alsa-to-Jack_bridge). >> >>=A0 There are a few advantages in this method (depends on your use-cases >> of course). But it could be improved (or so I think) by removing the >> following drawbacks: >> = >> The alsa_in/out jack clients are resampling the audio stream to >> synchronize with the device that jack is using. The resampling, done >> by libsamplerate, takes some CPU power. Since many users are using my >> recipe on laptops, this is not always welcome. >> = >> Because snd-aloop is a virtual device, couldn't it be made a clock >> slave of the h/w device that jack is operating on ? This would in >> principle remove the need for resampling. I could imagine that the >> module could be passed an option at loading time (e.g. modprobe >> snd-aloop clock-master=3D or something like >> that) > > Use 'PCM Rate Shift 100000' mixer control to fine tune the rate (timing) > for the snd-aloop PCM devices. An example using this solution is the > alsaloop application from the alsa-utils package. > > Also note that other controls can expose the audio format on the > playback side, so you can avoid resampling in the alsa-lib completely > for ALSA audio apps. The alsaloop application can give you more hints. Thanks for the hints! I have a few questions: 1- I can see the "PCM Rate Shift 100000" control when I list it with amixer= . = is there a way to have these (hidden) controls show up in alsamixer as well= ? 2- The range of this control is 80%-120%. Do I understand that it is a cons= tant ? Once set, it just stays there ? 3- How would I know which value I would have to set anyway ? 4- something a bit orthogonal: my main card is a Hammerfall HDSP + Multifac= e II. The access mode is MAP_NONINTERLEAVED according to the hw_params. This prev= ents me from e.g. combining this card and the virtual loopback into one (no= t that I want to do that in the end but I was experimenting with the merge = plugin at some point in the past) because the access mode is MAP_INTERLEAVE= D for snd-aloop. This also prevents the alsaloop utility from being used li= ke in this example: alsaloop -C hw:Loopback,1,0 -P hw:DSP This fires up OK, but then when I try to play something on hw:Loopback,0,0,= alsaloop gives up with an error message regarding the stream format being = wrong or the like (I am not sitting at home now, so I can't say preceisely). Thanks for clarifying these bits. Maybe this conversation should take place= in alsa-users ? J.