From: Wang Xingchao Subject: [PATCH] ALSA - Replace msleep() with usleep_range() to save module loading time Date: Mon, 10 Dec 2012 14:20:32 +0800 Message-ID: <1355120432-9840-1-git-send-email-wangxingchao2011@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by alsa0.perex.cz (Postfix) with ESMTP id 5488A265150 for ; Mon, 10 Dec 2012 07:39:20 +0100 (CET) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org, tiwai@suse.de Cc: mengdong.lin@intel.com, Wang Xingchao List-Id: alsa-devel@alsa-project.org msleep(1) is not so accurate and may cause almost 15ms delay in azx_reset(). usleep_range() can reduce ~30ms loading time for Intel Haswell which has two HDA controllers. Signed-off-by: Wang Xingchao --- sound/pci/hda/hda_intel.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index eb48109..865df90 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1075,22 +1075,22 @@ static int azx_reset(struct azx *chip, int full_reset) count = 50; while (azx_readb(chip, GCTL) && --count) - msleep(1); + usleep_range(1000, 1500); /* delay for >= 100us for codec PLL to settle per spec * Rev 0.9 section 5.5.1 */ - msleep(1); + usleep_range(1000, 1500); /* Bring controller out of reset */ azx_writeb(chip, GCTL, azx_readb(chip, GCTL) | ICH6_GCTL_RESET); count = 50; while (!azx_readb(chip, GCTL) && --count) - msleep(1); + usleep_range(1000, 1500); /* Brent Chartrand said to wait >= 540us for codecs to initialize */ - msleep(1); + usleep_range(1000, 1500); __skip: /* check to see if controller is ready */ -- 1.7.9.5