From: Eldad Zack Subject: [PATCH 0/3] M-Audio C400 corrections Date: Sun, 13 Jan 2013 23:02:01 +0100 Message-ID: <1358114524-5152-1-git-send-email-eldad@fogrefinery.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mail-bk0-f51.google.com (mail-bk0-f51.google.com [209.85.214.51]) by alsa0.perex.cz (Postfix) with ESMTP id C285D265113 for ; Sun, 13 Jan 2013 23:02:12 +0100 (CET) Received: by mail-bk0-f51.google.com with SMTP id ik5so1675486bkc.10 for ; Sun, 13 Jan 2013 14:02:12 -0800 (PST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Takashi Iwai Cc: alsa-devel@alsa-project.org, Eldad Zack List-Id: alsa-devel@alsa-project.org Hi Takashi, The following are specific fixes for the M-Audio FT C400. * Use the clock selector instead of the internal clock and add names for the clocks instead of Unit 129 and Unit 130. * Fix an issue where the latency would change every time the stream is started. Uses skip_packets. I think they could go in current mainline, since it is only for this device, but I also checked that they apply cleanly against for-next. Cheers, Eldad Eldad Zack (3): ALSA: usb-audio: correct M-Audio C400 clock source quirk ALSA: usb-audio: M-Audio FT C400 skip packet quirk ALSA: usb-audio: selector map for M-Audio FT C400 sound/usb/mixer_maps.c | 13 +++++++++++++ sound/usb/quirks-table.h | 4 ++-- sound/usb/quirks.c | 11 +++++++++++ 3 files changed, 26 insertions(+), 2 deletions(-) -- 1.7.12.4