From: Jonathan Brassow Date: Sun, 03 Feb 2013 02:27:31 -0600 Subject: [PATCH 0 of 3] Allow faulty RAID PVs to be replaced with error segments Message-ID: <1359880051.15387.8.camel@f16> List-Id: To: lvm-devel@redhat.com MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit There are currently two options for handling a failed PV in a RAID LV - "warn" or "replace". There is no option to "remove". If the failed device is never replaced, the user will continue to recieve error messages whenever LVM commands are run. The user may wish to remove the failed device from their VG, but they are currently unable to because 'vgreduce --removemissing' does not work on PVs that are contained in a RAID LV. This is especially annoying to users who do not have spare PVs, do not intend to add a spare, and cannot repair the failed PVs. The following 3 patches address this situation: 1) Make vgreduce work with RAID LVs 2) Allow down-convert to work on RAID images with error segments 3) Allow lvconvert repair to work on RAID images with error segments brassow