From: Archit Taneja Subject: [PATCH 23/33] OMAPDSS: tpo-td043: remove platform_enable/disable callbacks Date: Wed, 13 Feb 2013 19:52:15 +0530 Message-ID: <1360765345-19312-24-git-send-email-archit@ti.com> References: <1360765345-19312-1-git-send-email-archit@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from comal.ext.ti.com ([198.47.26.152]:60122 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934079Ab3BMOYY (ORCPT ); Wed, 13 Feb 2013 09:24:24 -0500 In-Reply-To: <1360765345-19312-1-git-send-email-archit@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: tomi.valkeinen@ti.com Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org, Archit Taneja The tpo-td043 panel driver now manages the gpios required to configure the panel. This was previously done in omap_dss_device's platform_enable/disable callbacks defined in board files using this panel. All the board files using this panel now pass the gpio information as platform data via the panel_tpo_td043_data struct, which is needed by the panel driver to configure the gpios connected to the panel. Hence, the platform_enable/disable ops can be safely removed now. Signed-off-by: Archit Taneja --- .../video/omap2/displays/panel-tpo-td043mtea1.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c index c8244bc..24bb0ff 100644 --- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c +++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c @@ -348,12 +348,6 @@ static int tpo_td043_enable_dss(struct omap_dss_device *dssdev) if (r) goto err0; - if (dssdev->platform_enable) { - r = dssdev->platform_enable(dssdev); - if (r) - goto err1; - } - /* * If we are resuming from system suspend, SPI clocks might not be * enabled yet, so we'll program the LCD from SPI PM resume callback. @@ -380,9 +374,6 @@ static void tpo_td043_disable_dss(struct omap_dss_device *dssdev) if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) return; - if (dssdev->platform_disable) - dssdev->platform_disable(dssdev); - omapdss_dpi_display_disable(dssdev); if (!tpo_td043->spi_suspended) -- 1.7.9.5