From: keith.busch@intel.com (Keith Busch) Date: Wed, 20 Feb 2013 17:19:28 -0700 Subject: [PATCH 0/8] NVMe controller shutdown related patches Message-ID: <1361405968-22085-1-git-send-email-keith.busch@intel.com> These are all related to shutting down a controller for various reasons. We do not want to take the gendisks down so that IO may continue. The nvme queues, though, have to be deleted so the bio queueing had change so that it is not queued on the nvme IO queues but on the device itself, which is what patch [1/8] tries to do. The original motivation was to handle if the controller is in a temporary failed state that a controller reset would clear up. Another thread on the nvme mailing list pointed out potential issues that could happen with the current IO timeout error handling should the controller end up completing an IO the driver canceled internally, so it was adapted to address that. Resetting the controller for these situations is much the same as the suspend/resume power management scenarios, and for a user controlled controller reset for firmware activate, so more patches were added for these as well. Keith Busch (8): NVMe: Queue bio requests on device NVMe: Controller reset from user NVMe: Suspend/resume power management NVMe: Add shutdown callback NVMe: End queued bio requests for removed disks NVMe: Wait for controller status ready to clear NVMe: Automatically reset failed controller NVMe: Use schedule_timeout for sync commands drivers/block/nvme.c | 313 ++++++++++++++++++++++++++++++++++++++++++-------- 1 files changed, 264 insertions(+), 49 deletions(-)