From: kishon@ti.com (Kishon Vijay Abraham I) Date: Thu, 7 Mar 2013 19:05:20 +0530 Subject: [PATCH v3 7/7] ARM: dts: omap5: add dwc3 omap and dwc3 core dt data In-Reply-To: <1362663320-23799-1-git-send-email-kishon@ti.com> References: <1362663320-23799-1-git-send-email-kishon@ti.com> Message-ID: <1362663320-23799-8-git-send-email-kishon@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add dwc3 omap glue data to the omap5 dt data file. The information about the dt node added here is available @ Documentation/devicetree/bindings/usb/omap-usb.txt. Also added dwc3 core dt data as a subnode to dwc3 omap glue data in omap5 dt data file. The information for the entered data node is available @ Documentation/devicetree/bindings/usb/dwc3.txt Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/omap5.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index bd73257..24dd69f 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -505,6 +505,24 @@ ti,type = <2>; }; + omap_dwc3 at 4a020000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss"; + reg = <0x4a020000 0x1000>; + interrupts = <0 93 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + dwc3 at 4a030000 { + compatible = "synopsys,dwc3"; + reg = <0x4a030000 0x1000>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + tx-fifo-resize; + }; + }; + ocp2scp { compatible = "ti,omap-ocp2scp"; #address-cells = <1>; -- 1.7.10.4