From: marcio at netopen.com.br Date: Wed, 13 Mar 2013 05:26:14 -0700 (PDT) Subject: [U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format Message-ID: <1363177574526-149567.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Our board reboots after send Wrong Image Format message to the console and hangs. The Linux uImage is correctly placed in the NAND 0X200000. The console input is somehow inhibit. I cannot type anything on it until the board reboots . The board is an AT91SAM9M10 custom board based on the AT91SAM9M10G45-ek development kit. It has only USB, Serial(DBGU), DDR2 and NAND. I have tried to remove the LCD code but the linker says that printk is missing. Any clue? Thanks -- View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567.html Sent from the U-Boot mailing list archive at Nabble.com.