From: Grazvydas Ignotas Subject: [PATCHv3 3/3] usb: musb: gadget: use platform callback to enable vbus Date: Sun, 24 Mar 2013 17:36:55 +0200 Message-ID: <1364139415-16695-4-git-send-email-notasas@gmail.com> References: <1364139415-16695-1-git-send-email-notasas@gmail.com> Return-path: In-Reply-To: <1364139415-16695-1-git-send-email-notasas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Felipe Balbi , kishon , Grazvydas Ignotas List-Id: linux-omap@vger.kernel.org On some platform configurations (like OMAP3+twl4030) it's the platform code that enables VBUS, not OTG transceiver, so call vbus platform callback instead, it will then call the transceiver if needed. This fixes a use case where USB cable is plugged first and gadget driver is loaded later after that. Signed-off-by: Grazvydas Ignotas --- drivers/usb/musb/musb_gadget.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ff6ba3a..4be4865 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1848,9 +1848,8 @@ static int musb_gadget_start(struct usb_gadget *g, goto err; } - if ((musb->xceiv->last_event == USB_EVENT_ID) - && otg->set_vbus) - otg_set_vbus(otg, 1); + if (musb->xceiv->last_event == USB_EVENT_ID) + musb_platform_set_vbus(musb, 1); hcd->self.uses_pio_for_control = 1; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html