From: Jon Hunter Date: Wed, 3 Apr 2013 14:35:33 -0500 Subject: [U-Boot] [PATCH 1/4] omap2420-h4: Fix DRAM initialisation In-Reply-To: <1365017737-5926-1-git-send-email-jon-hunter@ti.com> References: <1365017737-5926-1-git-send-email-jon-hunter@ti.com> Message-ID: <1365017737-5926-2-git-send-email-jon-hunter@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The size of the DRAM for the omap2420-h4 board is getting setup in the dram_init() function. However, for the current u-boot release this is too late and needs to be done in dram_init_banksize(). Therefore, add a dram_init_banksize() function for the omap2420-h4 board and setup the DRAM size there. Signed-off-by: Jon Hunter --- board/ti/omap2420h4/omap2420h4.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/board/ti/omap2420h4/omap2420h4.c b/board/ti/omap2420h4/omap2420h4.c index 188e4ac..532e989 100644 --- a/board/ti/omap2420h4/omap2420h4.c +++ b/board/ti/omap2420h4/omap2420h4.c @@ -190,10 +190,10 @@ void ether_init (void) * Routine: dram_init * Description: sets uboots idea of sdram size **********************************************/ -int dram_init (void) +int dram_init(void) { unsigned int size0=0,size1=0; - u32 mtype, btype, rev; + u32 mtype, btype; u8 chg_on = 0x5; /* enable charge of back up battery */ u8 vmode_on = 0x8C; #define NOT_EARLY 0 @@ -202,7 +202,6 @@ int dram_init (void) btype = get_board_type(); mtype = get_mem_type(); - rev = get_cpu_rev(); display_board_info(btype); if (btype == BOARD_H4_MENELAUS){ @@ -217,15 +216,28 @@ int dram_init (void) size0 = get_sdr_cs_size(SDRC_CS0_OSET); size1 = get_sdr_cs_size(SDRC_CS1_OSET); - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, size0 + size1); + + return 0; +} + +void dram_init_banksize(void) +{ + unsigned int size0, size1; + u32 rev; + + rev = get_cpu_rev(); + size0 = get_sdr_cs_size(SDRC_CS0_OSET); + size1 = get_sdr_cs_size(SDRC_CS1_OSET); + if(rev == CPU_2420_2422_ES1) /* ES1's 128MB remap granularity isn't worth doing */ gd->bd->bi_dram[1].start = PHYS_SDRAM_2; else /* ES2 and above can remap at 32MB granularity */ gd->bd->bi_dram[1].start = PHYS_SDRAM_1+size0; gd->bd->bi_dram[1].size = size1; - return 0; + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; } /********************************************************** -- 1.7.10.4