From: Stefan Roese Date: Thu, 4 Apr 2013 09:12:34 +0200 Subject: [U-Boot] [PATCH] flash: Add optional verify-after-write feature Message-ID: <1365059554-10662-1-git-send-email-sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Sometimes it might make sense to verify the written data to NOR flash. This patch adds this feature. To enable this verify-after-write, you need to define CONFIG_SYS_FLASH_VERIFY_AFTER_WRITE in your board config header. Signed-off-by: Stefan Roese --- common/flash.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/common/flash.c b/common/flash.c index 8244ba2..3ae3c9a 100644 --- a/common/flash.c +++ b/common/flash.c @@ -149,6 +149,9 @@ flash_write (char *src, ulong addr, ulong cnt) flash_info_t *info_first = addr2info (addr); flash_info_t *info_last = addr2info (end ); flash_info_t *info; + __maybe_unused char *src_orig = src; + __maybe_unused char *addr_orig = (char *)addr; + __maybe_unused ulong cnt_orig = cnt; if (cnt == 0) { return (ERR_OK); @@ -185,6 +188,14 @@ flash_write (char *src, ulong addr, ulong cnt) addr += len; src += len; } + +#if defined(CONFIG_SYS_FLASH_VERIFY_AFTER_WRITE) + if (memcmp(src_orig, addr_orig, cnt_orig)) { + printf("\nVerify-after-write failed!\n"); + return ERR_PROG_ERROR; + } +#endif /* CONFIG_SYS_FLASH_VERIFY_AFTER_WRITE */ + return (ERR_OK); #endif /* CONFIG_SPD823TS */ } -- 1.8.2