From: Jon Hunter Date: Tue, 9 Apr 2013 16:41:29 -0500 Subject: [U-Boot] [PATCH 1/5] omap5912-osk: Fix DRAM initialisation In-Reply-To: <1365543693-5742-1-git-send-email-jon-hunter@ti.com> References: <1365543693-5742-1-git-send-email-jon-hunter@ti.com> Message-ID: <1365543693-5742-2-git-send-email-jon-hunter@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The size of the DRAM for the omap5912-osk board is getting setup in the dram_init() function. However, for the current u-boot release this is too late and needs to be done in dram_init_banksize(). Therefore, add a dram_init_banksize() function for the omap5912-osk board and setup the DRAM size there. Signed-off-by: Jon Hunter --- board/ti/omap5912osk/omap5912osk.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/board/ti/omap5912osk/omap5912osk.c b/board/ti/omap5912osk/omap5912osk.c index fac683a..9e91c5e 100644 --- a/board/ti/omap5912osk/omap5912osk.c +++ b/board/ti/omap5912osk/omap5912osk.c @@ -128,14 +128,19 @@ void ether__init (void) Routine: Description: ******************************/ -int dram_init (void) +int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +} + /****************************************************** Routine: set_muxconf_regs Description: Setting up the configuration Mux registers -- 1.7.10.4