From: Fabio Estevam Subject: [PATCH v3 2/3] serial: imx: Allow module build Date: Wed, 5 Jun 2013 00:58:47 -0300 Message-ID: <1370404728-29707-2-git-send-email-festevam@gmail.com> References: <1370404728-29707-1-git-send-email-festevam@gmail.com> Return-path: Received: from mail-gg0-f170.google.com ([209.85.161.170]:40949 "EHLO mail-gg0-f170.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750713Ab3FEEE5 (ORCPT ); Wed, 5 Jun 2013 00:04:57 -0400 Received: by mail-gg0-f170.google.com with SMTP id s6so278671ggc.15 for ; Tue, 04 Jun 2013 21:04:57 -0700 (PDT) In-Reply-To: <1370404728-29707-1-git-send-email-festevam@gmail.com> Sender: linux-serial-owner@vger.kernel.org List-Id: linux-serial@vger.kernel.org To: gregkh@linuxfoundation.org Cc: shawn.guo@linaro.org, b35083@freescale.com, kernel@pengutronix.de, linux-serial@vger.kernel.org, Fabio Estevam From: Fabio Estevam There is no need to only allow the serial driver to be built-in. Allow the imx serial driver to be built as a module. Signed-off-by: Fabio Estevam --- Changes since v2: - Use depends on SERIAL_IMX=y as done on many other serial drivers drivers/tty/serial/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 7e7006f..7a0f705 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -551,7 +551,7 @@ config BFIN_UART3_CTSRTS Enable hardware flow control in the driver. config SERIAL_IMX - bool "IMX serial port support" + tristate "IMX serial port support" depends on ARCH_MXC select SERIAL_CORE select RATIONAL @@ -561,7 +561,7 @@ config SERIAL_IMX config SERIAL_IMX_CONSOLE bool "Console on IMX serial port" - depends on SERIAL_IMX + depends on SERIAL_IMX=y select SERIAL_CORE_CONSOLE help If you have enabled the serial port on the Motorola IMX -- 1.8.1.2