From: Fabio Estevam Subject: [PATCH v3 3/3] serial: imx: Improve Kconfig text Date: Wed, 5 Jun 2013 00:58:48 -0300 Message-ID: <1370404728-29707-3-git-send-email-festevam@gmail.com> References: <1370404728-29707-1-git-send-email-festevam@gmail.com> Return-path: Received: from mail-gh0-f173.google.com ([209.85.160.173]:47870 "EHLO mail-gh0-f173.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750882Ab3FEE0W (ORCPT ); Wed, 5 Jun 2013 00:26:22 -0400 Received: by mail-gh0-f173.google.com with SMTP id g16so123910ghb.4 for ; Tue, 04 Jun 2013 21:26:21 -0700 (PDT) In-Reply-To: <1370404728-29707-1-git-send-email-festevam@gmail.com> Sender: linux-serial-owner@vger.kernel.org List-Id: linux-serial@vger.kernel.org To: gregkh@linuxfoundation.org Cc: shawn.guo@linaro.org, b35083@freescale.com, kernel@pengutronix.de, linux-serial@vger.kernel.org, Fabio Estevam From: Fabio Estevam Some improvements in the Kconfig text: - Vendor is Freescale now - Provide a better example for the console parameter, which is something like console=ttymxc0 - Do not pass the names of ancient bootloaders Signed-off-by: Fabio Estevam --- Changes since v2: - Same as v1 drivers/tty/serial/Kconfig | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 7a0f705..1f2f54c 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -564,15 +564,14 @@ config SERIAL_IMX_CONSOLE depends on SERIAL_IMX=y select SERIAL_CORE_CONSOLE help - If you have enabled the serial port on the Motorola IMX + If you have enabled the serial port on the Freescale IMX CPU you can make it the console by answering Y to this option. Even if you say Y here, the currently visible virtual console (/dev/tty0) will still be used as the system console by default, but you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) + "console=ttymxc0". (Try "man bootparam" or see the documentation of + your bootloader about how to pass options to the kernel at boot time.) config SERIAL_UARTLITE tristate "Xilinx uartlite serial port support" -- 1.8.1.2