From: Roger Quadros Subject: [PATCH v3 2/2] USB: ehci-omap: select NOP_USB_XCEIV PHY driver Date: Fri, 14 Jun 2013 12:51:42 +0300 Message-ID: <1371203502-29624-3-git-send-email-rogerq@ti.com> References: <1371203502-29624-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <1371203502-29624-1-git-send-email-rogerq@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: balbi@ti.com Cc: gregkh@linuxfoundation.org, stern@rowland.harvard.edu, arnd@arndb.de, adrienverge@gmail.com, kishon@ti.com, linux-usb@vger.kernel.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, Roger Quadros List-Id: linux-omap@vger.kernel.org ehci-omap needs NOP_USB_XCEIV PHY driver to function properly, so select it. As the USB PHY drivers no longer depend on USB_PHY, it is safe to select the PHY drivers. Signed-off-by: Roger Quadros Tested-by: Adrien Verg=C3=A9 --- drivers/usb/host/Kconfig | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 7ded784..48e1b70 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -150,13 +150,11 @@ config USB_EHCI_MXC config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" depends on ARCH_OMAP + select NOP_USB_XCEIV default y ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. - If your system uses a PHY on the USB port, you will need to - enable USB_PHY and the appropriate PHY driver as well. Most - boards need the NOP_USB_XCEIV PHY driver. =20 config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller" --=20 1.7.4.1