From: Lucas Stach Subject: [PATCH 3/4] ARM: tegra: enable ULPI phy on Colibri T20 Date: Sun, 21 Jul 2013 23:28:51 +0200 Message-ID: <1374442132-24040-4-git-send-email-dev@lynxeye.de> References: <1374442132-24040-1-git-send-email-dev@lynxeye.de> Return-path: In-Reply-To: <1374442132-24040-1-git-send-email-dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Stephen Warren List-Id: linux-tegra@vger.kernel.org This was missed when splitting out the phy from the controller node in commit 9dffe3be3f32 (ARM: tegra: modify ULPI reset GPIO properties). Signed-off-by: Lucas Stach --- arch/arm/boot/dts/tegra20-colibri-512.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index fbb52e0..92551ba 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -457,6 +457,7 @@ }; usb-phy@c5004000 { + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; -- 1.8.3.1