From: txcotrader Date: Thu, 29 Aug 2013 09:08:20 -0700 (PDT) Subject: [U-Boot] CONFIG_BAUDRATE doesn't match Message-ID: <1377792500628-162206.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, I'm working with an AMCC based board and I'm running into an issue when I set my uart0 baud rate. In the include/configs/amcc-common.h there is the following code: #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} but after checking it on the o-scope it's not at 115200 baud. It seems like there is an offset of 3 because if I set the following bauds I get values on the o-scope like so: #define CONFIG_BAUDRATE 9600 // o-scope baud = 57600 #define CONFIG_BAUDRATE 19200 // o-scope baud = 115200 #define CONFIG_BAUDRATE 38400 // o-scope baud = 230400 Could someone point me in the direction of how this may be happening? Thanks! -- View this message in context: http://u-boot.10912.n7.nabble.com/CONFIG-BAUDRATE-doesn-t-match-tp162206.html Sent from the U-Boot mailing list archive at Nabble.com.