From: Eric Nelson Date: Thu, 29 Aug 2013 10:45:52 -0700 Subject: [U-Boot] [PATCH 2/2] i.MX6: nitrogen6x: Use new ANATOP_PFD_X macros In-Reply-To: <1377798352-22204-1-git-send-email-eric.nelson@boundarydevices.com> References: <1377798352-22204-1-git-send-email-eric.nelson@boundarydevices.com> Message-ID: <1377798352-22204-2-git-send-email-eric.nelson@boundarydevices.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 79ab449..58fe8ae 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -634,8 +634,8 @@ static void setup_display(void) writel(reg, &mxc_ccm->CCGR3); /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ - writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); - writel(0x13<pfd_480_set); + writel(ANATOP_PFD_FRAC_MASK(1), &anatop->pfd_480_clr); + writel(0x13<pfd_480_set); /* set LDB0, LDB1 clk select to 011/011 */ reg = readl(&mxc_ccm->cs2cdr); -- 1.8.1.2