From: Eric Nelson Date: Sat, 31 Aug 2013 14:38:28 -0700 Subject: [U-Boot] [PATCH RFC 0/22] i.MX6: Update pad declarations for multiple-arch binaries Message-ID: <1377985130-17239-1-git-send-email-eric.nelson@boundarydevices.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch series updates the pad declarations in the files arch/arm/include/asm/arch-mx6/mx6q_pins.h and mx6dl_pins.h to have consistent naming when a given pad is used for the same purpose. Most of the differences were simply changes in abbreviations between the two files, and where possible, the form used in the Linux kernel was used, even when the names are redundant (which is common - search for ANATOP_ANATOP). The primary exception to this is in patch number 5 for the pads setting up the PL301_AXI uses for various pads. The kernel declarations for those inexplicably have the processor architecture included in the pad name. You can get a picture of how the pads differ by running the following commands in arch/arm/include/asm/arch-mx6: for t in q dl ; do \ grep MX6_ mx6${t}-pins.h | \ awk '{print $1}' | \ sort > 6${t}.lst; \ done \ diff 6*.lst Doing a quick 'wc -l' after this patch series shows that around 2/3 of the differences are accounted for, and the majority of the remaining differences do reflect differences between the i.MX6DQ and i.MX6DLS processor variants. The primary reason this patch set is sent as an RFC is the overall feeling that there must be a better way and the fact that none of these pads is actually used by any current code in U-Boot and the vast majority of these changes will never do so (OBSERVABILITY pads, for instance). In-Reply-To: