Return-Path: Received: from mail.windriver.com (mail.windriver.com [147.11.1.11]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id AFFA5E013AB for ; Wed, 4 Sep 2013 00:22:09 -0700 (PDT) Received: from ALA-HCB.corp.ad.wrs.com (ala-hcb.corp.ad.wrs.com [147.11.189.41]) by mail.windriver.com (8.14.5/8.14.3) with ESMTP id r847M6VJ013238 (version=TLSv1/SSLv3 cipher=AES128-SHA bits=128 verify=FAIL); Wed, 4 Sep 2013 00:22:06 -0700 (PDT) Received: from pek-lwang0-d1.corp.ad.wrs.com (128.224.162.222) by ALA-HCB.corp.ad.wrs.com (147.11.189.41) with Microsoft SMTP Server id 14.2.342.3; Wed, 4 Sep 2013 00:22:06 -0700 From: Liming Wang To: , Date: Wed, 4 Sep 2013 15:08:29 +0800 Message-ID: <1378278510-19727-2-git-send-email-liming.wang@windriver.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1378278510-19727-1-git-send-email-liming.wang@windriver.com> References: <1378278510-19727-1-git-send-email-liming.wang@windriver.com> MIME-Version: 1.0 Cc: poky@yoctoproject.org Subject: [PATCH 1/2] beagleboard: upgrade u-boot to the latest version X-BeenThere: poky@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Poky build system developer discussion & patch submission for meta-yocto List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 04 Sep 2013 07:22:10 -0000 Content-Type: text/plain Now the latest version of u-boot is 2013.07 and it depends on its own MLO, instead of x-load, as the Second Program Loader. So remove x-load and use u-boot's MLO. And also replace u-boot.bin with u-boot.img as the u-boot image file. Signed-off-by: Liming Wang --- meta-yocto-bsp/conf/machine/beagleboard.conf | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/meta-yocto-bsp/conf/machine/beagleboard.conf b/meta-yocto-bsp/conf/machine/beagleboard.conf index 6633880..5f4c55a 100644 --- a/meta-yocto-bsp/conf/machine/beagleboard.conf +++ b/meta-yocto-bsp/conf/machine/beagleboard.conf @@ -13,7 +13,7 @@ XSERVER ?= "xserver-xorg \ MACHINE_EXTRA_RRECOMMENDS = " kernel-modules" # Allow for MMC booting (required by the NAND-less Beagleboard XM) -EXTRA_IMAGEDEPENDS += "u-boot x-load" +EXTRA_IMAGEDEPENDS += "u-boot" # Uncomment the following line to enable the hard floating point abi. Note that # this breaks some binary libraries and 3D (neither of which ship with @@ -33,6 +33,8 @@ PREFERRED_VERSION_linux-yocto ?= "3.4%" KERNEL_IMAGETYPE = "uImage" +SPL_BINARY = "MLO" +UBOOT_SUFFIX = "img" UBOOT_MACHINE = "omap3_beagle_config" UBOOT_ENTRYPOINT = "0x80008000" UBOOT_LOADADDRESS = "0x80008000" -- 1.7.9.5