From: Heiko Schocher Date: Thu, 5 Sep 2013 07:14:04 +0200 Subject: [U-Boot] =?utf-8?q?=5BPATCH_v1_1/2=5D_nand=2C_davinci=3A_add_spec?= =?utf-8?q?ial_UBL_ecc_position?= In-Reply-To: <1378358045-748-1-git-send-email-hs@denx.de> References: <1378358045-748-1-git-send-email-hs@denx.de> Message-ID: <1378358045-748-2-git-send-email-hs@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de enable the RBL/UBL ECC layout through CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC define see for more info: http://processors.wiki.ti.com/index.php/DM365_Nand_ECC_layout Signed-off-by: Heiko Schocher Cc: Tom Rini Cc: Scott Wood --- drivers/mtd/nand/davinci_nand.c | 10 ++++++++++ 1 Datei ge?ndert, 10 Zeilen hinzugef?gt(+) diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index d8bb5d3..9f5bd85 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -267,6 +267,15 @@ static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = { #if defined(CONFIG_SYS_NAND_PAGE_2K) .eccbytes = 40, .eccpos = { +#ifdef CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + }, + .oobfree = { + {2, 4}, {16, 6}, {32, 6}, {48, 6}, +#else 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, @@ -275,6 +284,7 @@ static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = { }, .oobfree = { {.offset = 2, .length = 22, }, +#endif /* #ifdef CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC */ }, #elif defined(CONFIG_SYS_NAND_PAGE_4K) .eccbytes = 80, -- 1.7.11.7