From: Heiko Schocher Date: Fri, 6 Sep 2013 05:21:22 +0200 Subject: [U-Boot] =?utf-8?q?=5BPATCH_v2_0/2=5D_arm=2C_da85x=3A_updates_for?= =?utf-8?q?_the_ipam390_board?= Message-ID: <1378437684-9273-1-git-send-email-hs@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de enable the RBL/UBL ECC layout through CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC define see for more info: http://processors.wiki.ti.com/index.php/DM365_Nand_ECC_layout and use this on the ipam390 board. Also do some minor changes for this board: - update default environment - change A2CR to correct value for UART boot mode - adapt cs3cfg timings for nand - change LED bootmode signalization - changes for v2: - patch: nand, davinci: add special UBL ecc position - add comment from Scott Wood: - move if/else/end to a more readable place Heiko Schocher (2): nand, davinci: add special UBL ecc position arm, da85x: update for the ipam390 board board/Barix/ipam390/ipam390-ais-uart.cfg | 2 +- board/Barix/ipam390/ipam390.c | 29 ++++++++------------------ drivers/mtd/nand/davinci_nand.c | 12 +++++++++++ include/configs/ipam390.h | 35 ++++++++++++++++++++------------ 4 Dateien ge?ndert, 44 Zeilen hinzugef?gt(+), 34 Zeilen entfernt(-) Signed-off-by: Heiko Schocher Cc: Tom Rini Cc: Scott Wood -- 1.7.11.7