From: Gilles Talis Date: Thu, 26 Sep 2013 10:52:03 +0200 Subject: [Buildroot] [PATCH] configs: add Freescale SABRE-SD board support In-Reply-To: <1380185523-26736-1-git-send-email-gilles.talis@gmail.com> References: <1380185523-26736-1-git-send-email-gilles.talis@gmail.com> Message-ID: <1380185523-26736-2-git-send-email-gilles.talis@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net SABRE Board for Smart Devices (SABRE-SD) is Freescale's evaluation board based on the i.MX 6Quad ARM Cortex-A9 applications processor. This defconfig is based off Freescale "official" git repo on git.freescale.com and SW release 3.0.35_4.1.0. Signed-off-by: Gilles Talis --- configs/freescale_imx6sabresd_defconfig | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 configs/freescale_imx6sabresd_defconfig diff --git a/configs/freescale_imx6sabresd_defconfig b/configs/freescale_imx6sabresd_defconfig new file mode 100644 index 0000000..4b071e7 --- /dev/null +++ b/configs/freescale_imx6sabresd_defconfig @@ -0,0 +1,15 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ROOTFS_DEVICE_CREATION_STATIC=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0" +BR2_LINUX_KERNEL_DEFCONFIG="imx6" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="mx6q_sabresd" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" +BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0" -- 1.7.10.4