From: nm@ti.com (Nishanth Menon) Date: Wed, 9 Oct 2013 18:24:53 -0500 Subject: [PATCH V6 10/15] ARM: dts: DRA7: Add CPU OPP table In-Reply-To: <1381361098-8283-1-git-send-email-nm@ti.com> References: <1381354144-7134-1-git-send-email-nm@ti.com> <1381361098-8283-1-git-send-email-nm@ti.com> Message-ID: <1381361098-8283-9-git-send-email-nm@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: J Keerthy Add DT OPP table for DRA7xx family of devices. This data is decoded by OF with of_init_opp_table() helper function. The data is based on DRA75x, DRA74x Data Manual revision F (Sept 2013). TODO: add OPP_HIGH after AVS-Class0 is functional NOTE: The voltage and frequency values work well only on NOM samples and it is mandatory to use ABB/AVS Class 0 support for all OPPs. Clock nodes are pending clock node alignment. [nm at ti.com: cleanups and rebase to latest] Signed-off-by: Nishanth Menon Signed-off-by: J Keerthy --- arch/arm/boot/dts/dra7.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 02e430b..92cbe3b 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -36,6 +36,12 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; }; cpu at 1 { device_type = "cpu"; -- 1.7.9.5