From: spdawson at gmail.com Date: Sun, 13 Oct 2013 09:03:07 +0100 Subject: [Buildroot] [PATCH v3] uboot: support -r option for mkenvimage Message-ID: <1381651387-3725-1-git-send-email-spdawson@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net From: Simon Dawson Some boards are configured in u-boot to store multiple redundant copies of the environment image in flash. For these boards, it is required to pass the -r flag, when generating a boot environment image using mkenvimage. Signed-off-by: Simon Dawson --- v3: Further improvement of help text, as suggested by Thomas Petazzoni v2: Change configuration menu text and help text, in response to feedback from Arnout Vandecappelle and Thomas Petazzoni boot/uboot/Config.in | 14 ++++++++++++++ boot/uboot/uboot.mk | 1 + 2 files changed, 15 insertions(+) diff --git a/boot/uboot/Config.in b/boot/uboot/Config.in index 998cda2..ea1c3cb 100644 --- a/boot/uboot/Config.in +++ b/boot/uboot/Config.in @@ -242,6 +242,20 @@ config BR2_TARGET_UBOOT_ENVIMAGE_SIZE Size of envronment, can be prefixed with 0x for hexadecimal values. +config BR2_TARGET_UBOOT_ENVIMAGE_REDUNDANT + bool "Environment has two copies" + help + Some platforms define in their U-Boot configuration that the + U-Boot environment should be duplicated in two locations (for + extra safety). Check your U-Boot configuration for the + CONFIG_ENV_ADDR_REDUND and CONFIG_ENV_SIZE_REDUND settings to + see if this is the case for your platform. + + If it is the case, then you should enable this option to + ensure that the U-Boot environment image generated by + Buildroot is compatible with the "redundant environment" + mechanism of U-Boot. + endif # BR2_TARGET_UBOOT_ENVIMAGE endif # BR2_TARGET_UBOOT diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index dc8e26f..e21ee81 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -117,6 +117,7 @@ define UBOOT_INSTALL_IMAGES_CMDS cp -dpf $(@D)/$(BR2_TARGET_UBOOT_SPL_NAME) $(BINARIES_DIR)/) $(if $(BR2_TARGET_UBOOT_ENVIMAGE), $(HOST_DIR)/usr/bin/mkenvimage -s $(BR2_TARGET_UBOOT_ENVIMAGE_SIZE) \ + $(if $(BR2_TARGET_UBOOT_ENVIMAGE_REDUNDANT),-r) \ -o $(BINARIES_DIR)/uboot-env.bin $(BR2_TARGET_UBOOT_ENVIMAGE_SOURCE)) endef -- 1.8.1.2