Received: with ECARTIS (v1.0.0; list linux-mips); Mon, 14 Oct 2013 15:17:32 +0200 (CEST) Received: from mms1.broadcom.com ([216.31.210.17]:1261 "EHLO mms1.broadcom.com" rhost-flags-OK-OK-OK-OK) by eddie.linux-mips.org with ESMTP id S6823097Ab3JNNPr0pG73 (ORCPT ); Mon, 14 Oct 2013 15:15:47 +0200 Received: from [10.9.208.55] by mms1.broadcom.com with ESMTP (Broadcom SMTP Relay (Email Firewall v6.5)); Mon, 14 Oct 2013 06:15:17 -0700 X-Server-Uuid: 06151B78-6688-425E-9DE2-57CB27892261 Received: from IRVEXCHSMTP3.corp.ad.broadcom.com (10.9.207.53) by IRVEXCHCAS07.corp.ad.broadcom.com (10.9.208.55) with Microsoft SMTP Server (TLS) id 14.1.438.0; Mon, 14 Oct 2013 06:15:18 -0700 Received: from mail-irva-13.broadcom.com (10.10.10.20) by IRVEXCHSMTP3.corp.ad.broadcom.com (10.9.207.53) with Microsoft SMTP Server id 14.1.438.0; Mon, 14 Oct 2013 06:15:18 -0700 Received: from netl-snoppy.ban.broadcom.com ( netl-snoppy.ban.broadcom.com [10.132.128.129]) by mail-irva-13.broadcom.com (Postfix) with ESMTP id 4B77E246A3; Mon, 14 Oct 2013 06:15:17 -0700 (PDT) From: "Jayachandran C" To: linux-mips@linux-mips.org cc: "Jayachandran C" , ralf@linux-mips.org Subject: [PATCH 06/18] MIPS: Netlogic: Get coremask from FUSE register Date: Mon, 14 Oct 2013 18:51:02 +0530 Message-ID: <1381756874-22616-7-git-send-email-jchandra@broadcom.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1381756874-22616-1-git-send-email-jchandra@broadcom.com> References: <1381756874-22616-1-git-send-email-jchandra@broadcom.com> MIME-Version: 1.0 X-WSS-ID: 7E4531EF4FK1415183-01-01 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 38326 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: jchandra@broadcom.com Precedence: bulk List-help: List-unsubscribe: List-software: Ecartis version 1.0.0 List-Id: linux-mips X-List-ID: linux-mips List-subscribe: List-owner: List-post: List-archive: X-list: linux-mips Use the FUSE register to get the list of active cores in the CPU instead of using the CPU reset register, this is the recommended method. Also add code to mask the coremask with the default number of cores for each processor series. Signed-off-by: Jayachandran C --- arch/mips/netlogic/xlp/wakeup.c | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c index 682d563..1011577 100644 --- a/arch/mips/netlogic/xlp/wakeup.c +++ b/arch/mips/netlogic/xlp/wakeup.c @@ -99,7 +99,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask) { struct nlm_soc_info *nodep; uint64_t syspcibase; - uint32_t syscoremask; + uint32_t syscoremask, mask, fusemask; int core, n, cpu; for (n = 0; n < NLM_NR_NODES; n++) { @@ -111,12 +111,33 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask) if (n != 0) nlm_node_init(n); nodep = nlm_get_node(n); - syscoremask = nlm_read_sys_reg(nodep->sysbase, SYS_CPU_RESET); + + fusemask = nlm_read_sys_reg(nodep->sysbase, + SYS_EFUSE_DEVICE_CFG_STATUS0); + switch (read_c0_prid() & 0xff00) { + case PRID_IMP_NETLOGIC_XLP3XX: + mask = 0xf; + break; + case PRID_IMP_NETLOGIC_XLP2XX: + mask = 0x3; + break; + case PRID_IMP_NETLOGIC_XLP8XX: + mask = 0xff; + break; + default: + mask = 0xff; + break; + } + + /* + * Fused out cores are set in the fusemask, and the remaining + * cores are renumbered to range 0 .. nactive-1 + */ + syscoremask = (1 << hweight32(~fusemask & mask)) - 1; + /* The boot cpu */ - if (n == 0) { - syscoremask |= 1; + if (n == 0) nodep->coremask = 1; - } for (core = 0; core < NLM_CORES_PER_NODE; core++) { /* we will be on node 0 core 0 */ -- 1.7.9.5