From: Oleg Dzhimiev Date: Tue, 15 Oct 2013 23:18:18 -0700 (PDT) Subject: [U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed In-Reply-To: References: <1381775402172-165384.post@n7.nabble.com> Message-ID: <1381904298629-165555.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Thanks to Michal - in the u-boot-xlnx/master-next (vs /master) the following lines were removed: board/xilinx/zynq/board.c: - /* temporary hack to take USB out of reset til the is fixed - * in Linux - */ - writel(0x80, 0xe000a204); - writel(0x80, 0xe000a208); - writel(0x80, 0xe000a040); - writel(0x00, 0xe000a040); - writel(0x80, 0xe000a040); This is board-specific (but the same for zedboard & microzed) USB reset wired to MIO7. Without these lines USB reset stays active. Thanks -- View this message in context: http://u-boot.10912.n7.nabble.com/u-boot-xlnx-master-next-branch-usb-not-working-for-microzed-tp165384p165555.html Sent from the U-Boot mailing list archive at Nabble.com.