From: Heiko Schocher Date: Mon, 4 Nov 2013 07:40:43 +0100 Subject: [U-Boot] [PATCH v2 0/4] arm, at91: support for the taurus, axm and corvus board Message-ID: <1383547247-7017-1-git-send-email-hs@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de add support for the AT91SAM9G20 boards from siemens. For the taurus and axm board, patch 1 from this series add some needed defines. Patch 2/4 is new in version 2, moved code for waiting if reset ends to a common place. patches are checkpatch clean, and a "./MAKEALL -s at91" compiles clean. Heiko Schocher (3): arm, at91: add function for waiting if reset ends arm, at91: add Siemens board taurus and axm arm, at91: add siemens corvus board Roger Meier (1): at91: add defines for reset type arch/arm/cpu/arm926ejs/at91/reset.c | 15 ++ arch/arm/include/asm/arch-at91/at91_rstc.h | 8 ++ board/siemens/corvus/Makefile | 39 ++++++ board/siemens/corvus/board.c | 216 +++++++++++++++++++++++++++++ board/siemens/taurus/Makefile | 38 +++++ board/siemens/taurus/taurus.c | 186 +++++++++++++++++++++++++ boards.cfg | 3 + include/configs/corvus.h | 165 ++++++++++++++++++++++ include/configs/taurus.h | 159 +++++++++++++++++++++ 9 files changed, 829 insertions(+) create mode 100644 board/siemens/corvus/Makefile create mode 100644 board/siemens/corvus/board.c create mode 100644 board/siemens/taurus/Makefile create mode 100644 board/siemens/taurus/taurus.c create mode 100644 include/configs/corvus.h create mode 100644 include/configs/taurus.h Signed-off-by: Heiko Schocher Cc: Bo Shen Cc: Andreas Bie?mann -- 1.8.3.1