From: Ian Campbell Date: Sun, 17 Nov 2013 15:17:43 +0000 Subject: [U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant Message-ID: <1384701463-22899-2-git-send-email-ijc@hellion.org.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The main purpose of this is to disable the use of the virtualisation extensions which Qemu does not emulate. Also enable a few additional commands and the u-boot API. This works for me with: $ dd if=/dev/zero of=pflash0.img bs=1M count=64 $ dd if=/dev/zero of=pflash1.img bs=1M count=64 $ qemu-system-arm -M vexpress-a15 -cpu cortex-a15 -kernel u-boot -m 1024m -sd mmc.img -nographic -pflash pflash0.img -pflash pflash1.img (for some reason both pflash images are needed for saveenv to work) Signed-off-by: Ian Campbell Cc: albert.u.boot at aribaud.net --- boards.cfg | 1 + include/configs/vexpress_ca15_tc2.h | 2 ++ include/configs/vexpress_common.h | 4 ++++ 3 files changed, 7 insertions(+) diff --git a/boards.cfg b/boards.cfg index caba64e..6e2fccc 100644 --- a/boards.cfg +++ b/boards.cfg @@ -245,6 +245,7 @@ Active arm arm926ejs versatile armltd versatile Active arm arm946es - armltd integrator integratorap_cm946es integratorap:CM946ES Linus Walleij Active arm arm946es - armltd integrator integratorcp_cm946es integratorcp:CM946ES Linus Walleij Active arm armv7 - armltd vexpress vexpress_ca15_tc2 - - +Active arm armv7 - armltd vexpress vexpress_ca15_tc2_qemu vexpress_ca15_tc2:ARCH_VEXPRESS_QEMU - Active arm armv7 - armltd vexpress vexpress_ca5x2 - Matt Waddel Active arm armv7 - armltd vexpress vexpress_ca9x4 - Matt Waddel Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h index 982f4a7..ccdb3c5 100644 --- a/include/configs/vexpress_ca15_tc2.h +++ b/include/configs/vexpress_ca15_tc2.h @@ -18,6 +18,8 @@ #define CONFIG_SYSFLAGS_ADDR 0x1c010030 #define CONFIG_SMP_PEN_ADDR CONFIG_SYSFLAGS_ADDR +#ifndef CONFIG_ARCH_VEXPRESS_QEMU #define CONFIG_ARMV7_VIRT +#endif #endif diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 7e78f8a..fbb9993 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -157,6 +157,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PXE #define CONFIG_MENU +#define CONFIG_CMD_ECHO #define CONFIG_CMD_ELF #define CONFIG_CMD_ENV #define CONFIG_CMD_FLASH @@ -164,6 +165,7 @@ #define CONFIG_CMD_MEMORY #define CONFIG_CMD_NET #define CONFIG_CMD_PING +#define CONFIG_CMD_EXT2 #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_RUN #define CONFIG_CMD_BOOTZ @@ -176,6 +178,7 @@ #define CONFIG_GENERIC_MMC #define CONFIG_ARM_PL180_MMCI #define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI +#define CONFIG_SYS_MMC_MAX_DEVICE 2 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 @@ -253,6 +256,7 @@ #define CONFIG_SYS_FLASH_BASE0 V2M_NOR0 #define CONFIG_SYS_FLASH_BASE1 V2M_NOR1 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0 +#define CONFIG_API /* Timeout values in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ -- 1.8.4.rc3