From: Eric Nelson Date: Sun, 17 Nov 2013 10:17:42 -0700 Subject: [U-Boot] [PATCH V3 0/5] imx: Define common routines to set cpu and board environment variables Message-ID: <1384708667-22489-1-git-send-email-eric.nelson@boundarydevices.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This series adds support for two environment variables that are useful for use in scripting startup of an O/S in general, and specifically in computing DTB names. Patches 1 and 2 implement the feature through arch_misc_init(), but don't enable it. Patch 3 overrides board_name for the nitrogen6x board file, which is used for both Nitrogen6X and SABRE Lite boards. Patch 4 enables the feature for nitrogen6x Patch 5 enables the feature for Freescale mx6*sabre* boards V3 reworks things completely based on feedback from the mailing list. In particular: -- the variable names were changes from "cpu" and "board" to "imx_type" and "board_name" -- the arch_misc_init() routine was added -- SABRE Lite environment was changed to use the feature Eric Nelson (5): i.MX5x: define cpu_type() to return processor portion of cpu rev. imx: Define common routines to set cpu and board environment variables i.MX6: nitrogen6x/sabrelite: override set_board_name() i.MX6: nitrogen6x/sabrelite: initialize imx_type and board_name values i.MX6: mx6*sabre*: initialize imx_type and board_name values arch/arm/imx-common/cpu.c | 24 ++++++++++++++++++++++-- arch/arm/include/asm/arch-mx5/sys_proto.h | 4 ++++ board/boundary/nitrogen6x/nitrogen6x.c | 14 +++++++++++++- include/configs/mx6sabre_common.h | 1 + include/configs/nitrogen6x.h | 9 ++++++++- 5 files changed, 48 insertions(+), 4 deletions(-) -- 1.8.1.2