From: jmgrimaud Date: Thu, 21 Nov 2013 01:17:20 -0800 (PST) Subject: [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3 In-Reply-To: <528531F6.8060500@ti.com> References: <1382715750-10363-1-git-send-email-hardik.patel@volansystech.com> <1382715750-10363-2-git-send-email-hardik.patel@volansystech.com> <526E5DE6.1040804@ti.com> <526E60F9.7010106@ti.com> <526FDA4F.6060609@ti.com> <1384423612-18697-2-git-send-email-hardik.patel@volansystech.com> <5285277C.8050400@ti.com> <528531F6.8060500@ti.com> Message-ID: <1385025440844-168096.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, I'm glad to see that solutions arrive to be able to boot on Pandaboard Rev B3. On top of this, does anybody could indicate me where I can find the u-boot repository and how to build it for Pandaboard ? To summarize, I made 3 tests: clone git://git.denx.de/u-boot.git checkout v2013.10 -b tmp build with omap4_panda_config >> when I flash MLO and u-boot.bin files in my sdcard, it does not boot at >> all clone https://android.googlesource.com/device/ti/panda/bootloader/uboot.git no specific checkout build with omap4_panda_config >> when I flash MLO and u-boot.bin files in my sdcard, it does not boot at >> all follow instructions from omappedia, i.e. retrieve, patch and build u-boot and xloader from git.omapzoom.org (http://omappedia.org/wiki/4AI.1.7_OMAP4_Icecream_Sandwich_Panda_Notes). >> when I flash xloader and bootloader files in my sdcard, it works very >> well on PandaRevB2, but not on Rev B3. Unfortunately, I do not know how >> to apply the changes described in this subject, as there is not the same >> files. -- View this message in context: http://u-boot.10912.n7.nabble.com/PATCH-pandaboard-0-1-Modification-of-Elpida-DDR2-RAM-for-Pandaboard-ES-Rev-B3-tp166135p168096.html Sent from the U-Boot mailing list archive at Nabble.com.