From: Kuo-Jung Su Date: Mon, 2 Dec 2013 16:02:59 +0800 Subject: [U-Boot] [PATCH v3 4/4] cmd_eeprom: bug fix for i2c read/write In-Reply-To: <1385971379-3096-1-git-send-email-dantesu@gmail.com> References: <1385971379-3096-1-git-send-email-dantesu@gmail.com> Message-ID: <1385971379-3096-5-git-send-email-dantesu@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Kuo-Jung Su The local pointer of address (i.e., addr) only gets referenced under SPI mode, and it won't be appropriate to pass only 1-byte addr[1] to i2c_read/i2c_write while CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 1. 1. In U-boot's I2C model, the address would be re-assembled to a byte string in MSB order inside I2C controller drivers. 2. The 'CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW' option which could be found at soft_i2c.c is always turned on in cmd_eeprom.c, the addr[0] always contains the device address with overflowed MSB address bits. Signed-off-by: Kuo-Jung Su Cc: Alexey Brodkin Cc: Jean-Christophe PLAGNIOL-VILLARD cc: Peter Tyser Cc: Heiko Schocher Cc: Wolfgang Denk Cc: Stefan Roese Cc: Mischa Jonker --- Changes for v3: - It turns out that what we did before 2013-11-13 (i.e., cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM) is still the best one, this patch simply rollback to it with coding style fix. Changes for v2: - Initial release common/cmd_eeprom.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index 02539c4..3924805 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -161,7 +161,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) spi_read (addr, alen, buffer, len); #else - if (i2c_read (addr[0], addr[1], alen-1, buffer, len) != 0) + if (i2c_read(addr[0], offset, alen - 1, buffer, len)) rcode = 1; #endif buffer += len; @@ -339,7 +339,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn /* Write is enabled ... now write eeprom value. */ #endif - if (i2c_write (addr[0], addr[1], alen-1, buffer, len) != 0) + if (i2c_write(addr[0], offset, alen - 1, buffer, len)) rcode = 1; #endif -- 1.7.9.5